Frigidare Gallery dishwasher GLDB958JS0

Try pressing and holding the Delay Start button for ~3 seconds. The 'loc' indicator should go out. If you hold the button for too long, then the lock could toggle back on. If the problem persists, you may have an issue with the keypad on the dishwasher.

I hope this helps. Please add a comment with the model number of the dishwasher if the control panel lock does not disengage.

Cindy Wells

Try unplugging the machine, and plugging it back in after one minute. This may reset the machines system.

That is the way to reset the unit. You unplug it first and let it sit a minute. Then plug it back in.

It's possible that you have put the dishwasher into delay mode. Try powering off at the powerpoint as this will force a reset of all programming.



The pause/start button also sets the Delay Start feature which can delay the start of a wash program
from 1 to 12 hours.


To cancel Delay Start
Press the I button.

have you accidently turned on a safety feature stopping the machine from starting? or is the door latches closed fully, if opened slightly could be preventing the machine from starting. or maybe its just a faulty start button.

Keep pressing the delay button until it reaches 00:00 - you have to go all the way around

Control board failure is monster problem with the entire line of Frigidaire dishwashers.
Secondly the drain pump could be bad.

can you give me the exact model # on your dishwasher and i will check for you.

Your touch pad has to be replaced to fix this one, be cautious with any liquids getting into contact with ANY touch pad.When cleaning just use a damp cloth.

Door switch had to be replaced. Turn off circuit breaker first.