Re: How do I get audio from my tv to my receiver through...
Your tv needs to have an HDMI out. If it has just connect that to the Denon. Tv might not have HDMI out so connect an optical cable from the tv's optical out to the Denon's optical in.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i seem to have a similar problem with my Denon AVR 4310CI . The output to my LCD TV just went green .
On checking with some people , they suggested resetting . it didnt work . Any probable reasons
ideally you would use an HDMI video cable but few video cards support that standard yet.
Your next best choice is to use a DVI to HDMI connection cable. They work very well as the video signal is the same between the two the only difference is that a DVI cable does not support sound so you will have to use a 3.5mm stereo (male) to RCA cable for sound.
Now there could be complications there as your receiver may not be able to display a video images off the hdmi cable while combining sound from the analog cable.
Some computer video cards have an RCA or s-video output and that will work BUT the picture quality is going to be bad, real bad.
a better option is to find a device that allows you to connect to your network to view images and videos. There are a number of such devices such as x-box 360, Tivo series 3 etc..
In the 2807 the HDMI out is a video out only. Audio is not processed through the HDMI output.
If you are using speakers it is best to adjust the playback modes to stereo if you are annoyed with surround sound modes.
Please comment if I helped.
An optical cable is digital but its only audio not video. Are you connected to a cable or satellite box, are you using composit video, s-vid, component video, or hdmi? What kind of cable goes from your denon to your tv?
hello if you know this spitter conduct voltage and its feed from main device and when you connect another it send it ground you have to do this chech with a voltmeter in the hdmi splitter output is not dc present if so change it cause is not blocking dc current saludos
There is a video select button on the receiver. Press it and it toggles through all of the video sources. Keep pressing it until the display says video=source.
Finally the problem was with the HDMI cable. When I pushed it in on the TV set the problem disappeared. It seems the connections must be quite firm on the HDMI cables otherwise anything may interfere to the sound.
×