How do I reset the language to english? It is a Canon W20 BJ-W9000

Hello,
this error code, stand for print head trouble.

You can try following:
1. Visual inspection:
Press down the BJ print head set locking lever to set it in a proper position if the
lever is pulled up.
Install the BJ print head if it is not installed.
2. Carriage unit
Visually check and replace faulty BJ print head set components or BJ print head
locking lever.
3. Replace the head controller.
4. Replace the system controller.


Hope that helps!

Hello,
It looks like you need to replace printhead and purge unit.

Hope that helps!

I have the bjw 9000 manuel on my desk top

email me at [email protected] and i will send you a copy
Tony

Print-position sensor calibration warning
Error occurred when calibrating the print-position sensor before the paper-width
detection sequence.


cHECK SENSOR

Hi Dan,

I have a user manual at home, sorry I am at work at the moment.

I am not sure if it has your code in there but I will have a look, if so I will get back to you.

Sorry this does not fix your problem straight away.

I have a problem that you may be able to help me with?

My fiery controller has crashed!

I need a copy of the disc for the controller, it a Image Pass-W20 print controller, I believe this is the standard print controller sold for this model.

I run PC computers with XP but i think the controller run NT, so i am not sure how they manage to talk to one another?

Any help would be appreciated.

Thanks

Steve
[email protected]

The BJW 9000 manuel is available as a free download I have downloaded it my self but dont have it at home why not do the same
Tony (withtrader)
best of luck

scanner erorr canon MP180

At this stage we have found 2 ways that might work but not guaranteed to work with all machines.

Method #1

1. POWER off printer
2. Hold RESUME button then press and hold POWER, the beeper will sound once
3. Hold POWER and release RESUME
4. Press RESUME twice
5. Release POWER button
6. When the indicator light is steady press RESUME three (3) times. Indicator light should be orange
7. Press POWER to set data

Hi Caroline here is the problem defonition

E7260
: Nozzle check sensor unit error
E7270 to E727b/W7280/E7281/E7290/ E7291
:Nozzle check error
<Cause>
The position of the nozzle check sensor unit was faulty.
An abnormal condition occurred in the nozzle check sequence.
An abnormal vibration in the printer, the BJ print head is abnormal or no ink was
delivered to the BJ print head.
<Probable faulty component>
BJ print head, nozzle check sensor ***'y, linear scale, encoder sensor unit, carriage
controller, head controller, system controller.
<Action>
1. Check the ink filling status:
Execute "Fill Ink" from the Service Mode when there is no ink in the ink tube of
the carriage caterpillar component. Execute cleaning when the carriage air buffer
is filled but the ink tube of the BJ print head locking lever is empty.
2. BJ print head:
Replace the BJ print head if the above procedure does not solve the problem.
3. Nozzle check sensor check:
Re-install the nozzle check sensor holder unit if the installation condition is
incorrect.
If the installation condition is correct, select "Nozzle Check Position" from the
Service Mode, turn the power off and on, and obtain the updated and appropriate
nozzle check position.
4. Replace the nozzle check sensor ***'y.
5. Check the linear scale:
Visually check the linear scale for abnormal conditions, such as stains or damage.
6. Replace the carriage controller.
7. Replace the head controller.
8. Replace the system controller.
9. Replace the carriage unit.

I hope this helps
If not please get back to me
Thank You

Go to this site and look at " save my inkjet"


http://checkitright.spruz.net//main.asp?page=dp&dis=592197

then go to "keep your head clean"