White Screen... The Problem with my cell is that when i insert battery in to the phone...white light on the screen comes....without doing any thing....not even switching phone ON...please help

How can i unlock my nokia 6136

Have you tried a reset or a reboot? Try these steps:

1. Power off the cell phone by holding down the power button for at least 5 seconds. The screen should turn black. Now, let go of the button and press it again until the screen lights up again.

2. If the screen is still white while holding down the power button, open up the back of the cell phone and remove the battery. Wait for 30 seconds before putting the battery back in, to allow the software to reset itself. Put the battery back in and press the power button until the screen lights up again.

3. If you removed the battery and you still have a white screen, you may have a software issue. Go to a local cell phone repair company and have it replaced or fixed.

Remove the battery to shut the phone off, insert the battery, hold down the left and right softkeys, and press the reset button on the left hand side.

Many smart phones will have problems if you remove the battery without powering them off first. The easy fix for the state your phone is in is to run your battery down. If you get it to the point where it will auto power of anyway, and leave it like that for at least an hour with the battery in, it should reset the power management.

try to remove the memory card of the phone... or, you my also synchronize your phone to your pc..


i just want to advice you that you can fix this problem by checking any updates for your phone or by doing a full reboot. to do a full reboot, just remove the battery and sim whilst the phone is on. then insert the battery without the sim, then turn it on. remove again the battery without turning it off. insert the sim and the battery. hopefully, this works chrisine.

Hello

The white screen of death is a flex problem.

The flex of a phone is what connects the screen to the board of the phone. it is found in most flip and slide phones.

When you flip and slide these type of phones after a while the flex gets weak and that causes the white screen you see.


The only solution is to have your flex changed,that will definitely solve the problem..

Goodluck

try taking out the battery without turning it off first then turn it right back on after a few seconds

you need to get a new battery.

its the FLEX CABLE! need to change it..the cable that connects the LCD screen to the main motherboard

i have a razor vx3 that was doing this every time i would get a phone call. I returned it for a new phone thought att.