Question about Astar LTV-2701 27 in. HD-Ready LCD Television

1 Answer

42 inch Akai plasma - no pix no sound

Green light comes on, get no picture or sound. Can't turn off...have to unplug to turn off. Plug in again and red light comes on, power on and get green light but not picture or sound....can't turn off without unplugging.

Posted by FernieCh on

  • FernieCh May 21, 2008

    Fixable or replace the TV?

  • FernieCh May 21, 2008

    Yes...TV not responding to remote signals either.

×

Ad

1 Answer

dewan nafees ahmed

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

I think your power board has some serious problem

Posted on May 21, 2008

  • dewan nafees ahmed May 21, 2008

    is your set not responding to any remote signals also?

  • dewan nafees ahmed May 21, 2008

    just find the bad components on ur power board.
    else replace the board itself


×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Akai pdp4225m plasma has a green light but no sound and no pic. It was hooked up to a satilite reciever that blanked out also. Is there a reset button or a proceedure that might get the tv working again.

Hold a flashlight up to screen about 2 inches and see if you see a picture, and if so then it's the inverter board, you can check shopjimmy.com to see the price.
2helpful
2answers

Philips flat screen 42" flashing red light 7 times it stops for 5 seconds and 7 more flashes if i unplug and plug it a few time it will come on

my 42 inch phillips, i turn it on green light comes on for 10 sec then red light comes on and flashes 4 times then stops for 5 sec then repeats.
0helpful
2answers

My tv has sound but no picture its an akai model pdp4206em1

Try unplugging it for an hour or so or try change sources , if the computer ever fell asleep while it was plugged in it is possible it triggered a sleep mode in the tv. Most will do such a thing. It is doubtful that the computer caused any damage to it but i would advise against using a plasma tv as a computer monitor because burn in WILL eventually occur with a static image left on the screen constantly.
0helpful
1answer

Sanyo DP42746.Can't get tv to come on. The green power LED is on.

unplug the power connector to the tv, wait two minutes then plug it back in and try to turn on the set... this worked for me.
0helpful
1answer

No picture akai 42 inch plasma

I have not solved problem, although I paid you to solve it many months ago. The information I paid for was not the problem although the answer I was given was someone telling me it was for sure the problem.
0helpful
1answer

Modle #lc002 42 inch plasma wont turn on

Remove and restore the power. Pull the power plug for several minutes then plug back in and try again. Also make sure that the vents are clean and that the unit isn't overheating.
0helpful
2answers

Akai pdp 4294 wont turn on

The power supply board needs to be replaced or repair. No other quick fix is available. Thanks
0helpful
1answer

Can't get anything on the screen

Unplug the power cord from the TV set and leave it unplugged for 5 minutes. Plug the power cord back into the TV and turn it on. It should work. This is not an uncommon problem for the Akai line.
0helpful
2answers

Akai pdp4298 42 in. plasma

The clicking sound is the relay switch on the power board, it could be the power board or the logic board
0helpful
3answers

Screen went out

I had the same problem, but I had no sound at all. The power indicator light was flashing green. I tried to unplug the unit and plug it back in, but the light then was red briefly, turned orange then flashing green. What I did to solve the problem was to unplug the set and leave it for a few minutes then plug it back in and hit the front power switch at the same time. Voila! It started working again. Good luck solving this.
Not finding what you are looking for?
Astar LTV-2701 27 in. HD-Ready LCD Television Logo

Related Topics:

373 views

Ask a Question

Usually answered in minutes!

Top Astar Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76698 Answers

Raj Patel

Level 3 Expert

1042 Answers

Cindy Wells

Level 3 Expert

6302 Answers

Are you an Astar Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...