Benq joybook 3000 doesn,t go to post

you need to clarify your question

Hi, I repair a Benq joybook Lite U101 series and the wireless module can not see by the Windows 7 . Every time when I have started to install the driver appear this message "QMI module not exist".

Take a look on this page.

http://notebook.driversdown.com/notebook-drivers/BenQ-Joybook-Display-Driver_125511.shtml

Or have a web search for:
BenQ Joybook A53 Chipset & Display Driver V6.24.10.3820 for Windows XP

check the display on vga mioniter if there check for screen ccfl nd lcd invertor
if not replace the ram with other one if it not work its problem of vga chip

Its out of charge! Charge the batteries..

a number of things could be wrong- bad ram, bad motherboard. a bad hard drive will still usually get you a post screen. if you are at least getting a post screen, i would look towards hard drive issues.

the benq joybook has listed since 26/11/2003

Here is the manual. I hope it helps

http://service.benq.com.hk/HKUploadFile/Book/Joybook3000(3000MU)M.pdf

G'luck

This is common when the charger is not working anymore and the battery is almost dead. It has just a few seconds of life.
Verify that the charger is working. Plug it in and see if any of the light come one in the front then unplug. If not lights then it isn't charging. Even if the light comes on, you need a multimeter (12.00 at walmart) and put it in and check for the 24/28Vdc (read what the output is on the bottom of the power cord).