Hello. I am looking for the code for the dvd player to work on my pioneer avic d3 navigational system. How to I install the code?

The D3 does not have a good navigation system in it, and because it is old and beyond its life cycle the fractional wear on the drive causes it to have trouble reading discs. Try cleaning the disc with a little water and soft cotton cloth. Do not touch the bottom of the disc after you clean it. If that does not work, then you need a new disc. You can try making a copy of the disc you have. If the program on the disc is good then you just need a copy that your unit will like. To make it simple.

the d3 will play dvds, and you can buy a cd changer for it seperately.

Write to Pioneer with Model number & serial number with a letter of explanation and they will respond with the code.

There is an update on ebay and other sites for about $250. Also try the pioneer web site. If this is new construction, it probably will not be available for atleast another year.

you may find the guys at maple audio can repair your exsisting unit they are specialists and we in the trade use them a lot www.mapleaudio.co.uk or 01255442180

The disks will work, but the gps unit will not. so the navigation will be useless.

Go to www.pioneerelectronics.com to down load a user manual and start reading it.

Hi,

I also tried playing the European East DVD without success.
FM goes by increment of .2, impair. i.e. you can not get 98.2.
You can only have 98.1 or 98.3.
Calling Pioneer Us did not help.

Can you be more specific like what are you pairing your D3 with, and when you turn down the volume? The volume of the D3 or the pairing device? More info would be helpful.