I have a Meridian Norstar # PO728290. The person formerly using this office phone programmed the answering machine but does not remember the password she chose. I need to change the password and put my own message on the answering machine.

I guess you want a page key programmed on your set. press feature *3, press a memory key, press feature 610. This key pages all sets when pressed.

F983 then enter the ext # manually (not a speed dial/button), you must have 2 Intercom keys programmed on your phone.

You will need to enable it in programming. Access programming by dialing Feature **266344, then using 266344 for your password. Your password may be different. Contact your phone company for more details. Scroll to "General Admin". Scroll to "Permissions". Enter set number. The first option is "Full handsfree:N" Press CHANGE to set it to "Y". Scroll to HF Answerback and adjust it to "Y" to complete the process. Press Rls to exit programming.

Have your system administrator go into voicemail programming and reset the mailbox password. The default password will be "0000".
I hope you understand that having passwords in the first place is a security measure, so I will not give directions for hacking into your companies voicemail system.

Should be simple ... just change the pair you used in the former office to the new office in your punch down closet.

right top Show
right bottom Next
left top Heading
left bottom Back

you would need to get into the admin programming to change the name, have your system admin person make the change for you.

try using password 266344

You will have to go into system programming, under sets, line appearances. You will need to set the lines on the phones to appear and ring, not just appear.

Search the web for a manual on how to use your phone.

If you are getting calls, then the lines are programmed in the system. There is no way to disable the transfer or hold buttons.