Question about LeapFrog Leappad Plus Writing
If it does power up, and you are unable to get only the Go button not to function, there could be 3 problems
1. the cartridge is dirty
2. the sytlus is bad
3. the sensor membrane is wet or bad.
Clean the cartridge or try another book.
Replace the stylus.
Dry out the leap pad (this is a last resort. place the leapPad in a sunny window for a day, standing upright and open (remove batteries).)
If nothing else works, you can find another leapPad at most thrift stores (that works!), for about $5-$25 (any model, but you might not get a lot of model choices, but some even come with books and cartridges you might not have!)
Take a book and a cartridge with you, maybe even batteries, and ask the store if you can try it before you buy it (they will usually let you test it)
Posted on Oct 01, 2010
My Leappad PlusWriting stopped recognising the GO symbols on all books as well. The internal electrical connections for the left-hand page are held together by a plastic clamp which appears to bend up in the middle over time. Adding a small bracket above the original clamp (to straighten it out) sorted the issue out. This appears to be a design fault.
Posted on Apr 27, 2013
Tips for a great answer:
Dec 27, 2013 | LeapFrog Toys
Dec 25, 2013 | LeapFrog Leappad Plus Writing
Jun 25, 2011 | LeapFrog Leappad Plus Writing
Given two sets S and T we declare S<T.if there is a mapping of T onto S but no mapping of S onto T is possible .prove that if S<T and T<U then S<U.
Nov 11, 2010 | Computers & Internet
Oct 01, 2010 | LeapFrog Leappad Plus Writing
Jun 11, 2010 | LeapFrog LeapPad Learning System:...
2,604 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: