Samsung HLN5065W 50" Rear Projection HDTV-Ready Television Logo

Question about Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

1 Answer

Whistle noise? POP? Black out

Was watching TV all of a sudden I heard a Whistle noise… then I heard a loud POP… finally the screen went Black. I could not turn the TV set off until unplugged from the wall. Plugged back on and no video but sound was OK initially. The sound went away (intermittent)?
What could have happened?

Posted by mike_bz on

  • mike_bz May 24, 2008

    I just got the lamp from parts.com and should be able to install this weekend. As soon as I get it done I'll let you know how the suggestion worked.

    Thanks,

    Mike_BZ

  • mike_bz May 28, 2008

    Well, after removing the old lamp and replacing for the new one, the tv did not work. I decided to take the set apart and checked all electronics/boards for any visual signs of burned or defective components and to my relief, none were damaged. I then moved to the light generation section and interestingly enough, I noticed some sparkles on the inside of the glass portion of the beam assembly. Lo and behold the Whistle... PoP and Out goes all.. turned out to be the COLOR WHEEL that had exploded into tiny bits/pieces. So after purchasing the Lamp and not being the culprit, I needed to spend the money to purchase the Color Wheel. I hope to get it this week and should make the trip back to my in-law and see if this takes care of the problem, which am almost certain it will.

    Needless to say, thanks to Slinteriors for leading me in the right direction and for the patience to get my feedback.

×

1 Answer

Sonny Berry

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 8,617 Answers

Sounds like the lamp has shattered. check the lamp

Posted on May 18, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Samsung plasma screen went black. Was watching tv, heard a loud pop and the screen will no longer turn on. You can hear the tv turn on but no picture. Power is still working, just a blank screen.

Issue is either with the X or Y sustain board. Look for a cap that has blown or a cracked solid state device on the board. One of them is responsible for the ***** croak you heard.
0helpful
1answer

We heard a "pop" noise

The pop noise could be a capacitor poping its top up.This is a common problem to most TV sets today. Usually located at the power supply board.Once this parts give up it usually shorts the circuit and blows a fuse.Replacements of these parts mentioned will often remedy the problem.Flashing power indicators indicate a problem.If you have the chance of counting how many the blinks are I could have told you the problems code are and the source of the problem.
0helpful
1answer
0helpful
1answer

No Picture, Power light Blinking 3 times then repeats

3 times blink shows lamp cover is removed or not installed properly on TV.
Please take out lamp inside TV and check, seems its broken as you heard loud pop.
Thanks.

1helpful
1answer

I heard a loud pop then tv screen went black, now

hi friend,,,,,,,
i think due to high voltage resistor in dma board has blasted,,,,,
did u see any burnt marks,,,,,,,,,reply me

thank u,,,,,,,,
0helpful
1answer

When I was watching the tv it suddenly started to flash off and on and then finally will not even turn on

Watching tv all of a sudden loud buzz noise,I shut off unit turned back on loud buzz came back about 30 seconds later loud pop pop then smoke came out of top of unit, i'm not please as this unit i bought about 17 months ago @ Canadian Tire Belleville & warranty is now not covered, pobably will never buy another Proscan product but am more concerned there could be a fire caused buy this than getting unit replaced
0helpful
1answer

Tv went out after loud pop and has clicking noise does not turn on

If you have a Sony DLP, then the loud pop you heard is your lamp.  The lamps last approx. 4K-6K viewing hours.  Read your manual for replacement part number to reorder and very simple to replace yourself.
0helpful
1answer

Heard a pop and screen went black

Sorry thats the death of your tv I
m afraid, the pop you heard is either your lamp or tube going boom.
0helpful
2answers

Vizio P50 screen refresh

power supply.Definately will need to be replaced. Im actually looking for one to replace myself.TV repairs charge 1200 to repair.
0helpful
1answer

No picture

Bad IHVT ( flyback transformer)--need complete service
number off back for part #-----------Let me know...T.
Not finding what you are looking for?

897 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Cindy Wells

Level 3 Expert

6627 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...