Need a belt routing diagram for a 2006 toyota rav4

As they are in close proximity yes.

fuse 23

https://fuse-box.info/toyota/toyota-rav4-xa30-2006-2012-fuses-and-relay

https://www.google.com/search?q=2006+toyota+rav4+fuse+box+diagram

..

Go here and click on routing view
https://www.daycoproducts.com/parts?category_id=1084&year=2006&make=67&modeltype=2&model=3462&description=10797

be careful - that is not an easy job.....
if done wrong the engine will be busted....
better let a toyota-shop do that if you are not a mechanic
sample: 2000 Toyota RAV4 Serpentine Belt Routing and Timing Belt Diagrams

You'll need to buy a tensioner release tool to do the job. Any auto parts store sells them. Use the tool to release the tension by moving the pulley enough to get the belt off . Route the new belt around all the pulleys on the engine according to the diagram sticker under the hood.once you're ready to put tension on the new belt, move the pulley again and put the belt under the pulley. Release the tool and you're done.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

http://www.2carpros.com/diagrams/toyota/rav4/2003

hi i have a picture for the routing of the belt i have a 1.6 a 2.0 and 2.0d and D-4d engines, i will send them to you if you can email me at
[email protected]
i will send all 3 pictures you choose which one is for your vehicle ok

2006 TOYOTA 4RUNNER - V6 4.0L 3956cc GAS FI N 1GRFE
Belt Routing Diagram - Multiple Accessory, w/A.C.



From DAYCO Products Catalog

Hope help with this (remember rated this post). Good luck.

First be sure to note the routing.
there is a tension pulley (check the diagram stiker on hood or crossmember) using a serpentine belt tool fit the correct socket on center nut of tensioner and pull to release tension. If tensioner will not move either way or does not spring fully back replace.

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?partName=Engine+Mechanical&pageId=0900c1528019c35b&partId=0900c1528019c35b

go here i think this will help