Question about Texas Instruments TI-83 Plus Calculator

Ad

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Posted on Sep 19, 2014

Ad

SOURCE: when i try to graph a scatter plot on my ti-83

Your stat plots are on, and may not be filled out/ correctly filled out.

go to [Y=] and go up to the stat plots ([Plot 1], [Plot 2], [Plot 3] ) and turn off the ones that are "ON" ( highlighed black w/ white text.) and press [ENTER] on the ones that are on and the problem is no more.

Posted on May 14, 2009

Ad

SOURCE: how to remove "err: invalid dim".

Hi,

The solution for the problem is simple. When you use the calculator to create graphs, it is configured to accommodate the specificities of the problem. However that configuration remains set after you terminate the problem. So when you try to use the calculator to do other problems it uses the stored configuration parameters, which may be incompatible with the new problem.

In particular, list of paired-variables must have the same dimensions: There must be the same number of elements in each list.

To make a long story short, you should make it a habit to reset the Ram everytime you want to do a new problem. If for reasons of you own you do not want to reset the Ram, you can prevent this type of errors from occurring. This is how you do it.

- Press [2nd][Y=] (STATPLOT)
- Choose option [4:PlotsOff][ENTER]. Screen displays Done
- Press [2nd][0] (CATALOG)
- Press [PGRM] (C) to jump to first command that starts with c.
- Use arrow to scroll down to
**ClrAllLists,**s**elect it [ENTER]** - Calculator displays
**Done** - Start the new problem

Hope it answers your questions.

Thank You for usibg FixYa.

Posted on Nov 24, 2009

SOURCE: whenever i try the graph

You have to turn all statistical plots OFF before you draw function graphs. Press [2nd][Y=] to open the statistical plot configuration screen. Press [4:PlotsOFF] and then [ENTER]. When calculator answers DONE you are ready to draw function plots.

Posted on Sep 10, 2010

SOURCE: I entered and calculated data

If you have a frequency list it must be entered in a statistical list, L2, L3, ...or L6.

If the frequency of all elements is 1 you do not need to enter the frequency in a list. When you go to draw the box plot, the frequency will be set to 1.

Posted on Sep 11, 2010

Invalid dimension is displayed if the two columns have unequal length (number of elements).

Try plotting the scatter plot first, then worry with the Zoom.

Try plotting the scatter plot first, then worry with the Zoom.

Apr 11, 2014 | Texas Instruments TI-83 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Nov 01, 2013 | Texas Instruments TI-83 Plus Calculator

The
ERR:INVALID DIM error message may occur if you are trying to graph a
function that does not involve the stat plot features. The error can be
corrected by turning off the stat

plots. To turn the stat plots off, press {2nd}[stat plot], and then select 4:Plots Off.

plots. To turn the stat plots off, press {2nd}[stat plot], and then select 4:Plots Off.

Jan 23, 2011 | Texas Instruments TI-83 Plus Calculator

The ERR:INVALID DIM error message may occur if you are trying to graph a function that does not involve the stat plot features. The error can be corrected by turning off the stat

plots. To turn the stat plots off, press {2nd}[stat plot], and then select 4:PlotsOff.

plots. To turn the stat plots off, press {2nd}[stat plot], and then select 4:PlotsOff.

Jan 19, 2011 | Texas Instruments TI-84 Plus Silver...

Jan 14, 2011 | Texas Instruments TI-84 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

If this doesn't do it, could you post the exact function you're trying to graph?

If this doesn't do it, could you post the exact function you're trying to graph?

Nov 16, 2010 | Texas Instruments TI-83 Plus Calculator

Oct 28, 2010 | Texas Instruments TI-84 Plus Silver...

If the message appears when you try to graph functions deactivate the
statistical plots. To do so:

Press [2nd][Y=] to access (STAT PLOTs)

Select [4:PlotsOff] then [ENTER]

That should solve your problem. Post a comment to this thread if you still have trouble graphing.If the message appears in another context, it sure would help knowing the context of the error.

Press [2nd][Y=] to access (STAT PLOTs)

Select [4:PlotsOff] then [ENTER]

That should solve your problem. Post a comment to this thread if you still have trouble graphing.If the message appears in another context, it sure would help knowing the context of the error.

May 12, 2010 | Texas Instruments TI-84 Plus Calculator

Your stat plots are on, and may not be filled out/ correctly filled out.

go to [Y=] and go up to the stat plots ([Plot 1], [Plot 2], [Plot 3] ) and turn off the ones that are "ON" ( highlighed black w/ white text.) and press [ENTER] on the ones that are on and the problem is no more.

go to [Y=] and go up to the stat plots ([Plot 1], [Plot 2], [Plot 3] ) and turn off the ones that are "ON" ( highlighed black w/ white text.) and press [ENTER] on the ones that are on and the problem is no more.

May 12, 2009 | Texas Instruments TI-83 Plus Silver...

Apr 20, 2009 | Texas Instruments TI-83 Plus Calculator

208 people viewed this question

Usually answered in minutes!

×