- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ibm sound card is not faulty, because you are getting sound with your head phone. The head phone jack have two functions 1. to give output to head phone 2. to disconnect internal speakers when you plug in head phone. The jack for headphone in normal position not give connectivity to internal speakers. SOLUTION : REPLACE THE HEADPHONE JACK. I think it will help you.
Hello , Just switch off your speaker power or your head phone. Actually you should choice head phone speaker instead off more than 2.1 or 5.1. You have also,sound control lcon in your tusk menu bar or you can collect I from control panel.
Hi, a blue tooth device would allow you to hear and speak through it so it should solve your problem.
the only problem you may have is if the water damage has causes damage to bluetooth inside the phone, try choosing bluetooth on your phone and see if you can still do a search and connect with another phone, if you can still connect to another phone to say send music or picture via bluetooth then this would suggest your bluetooth is fine and using a bluetooth head set will solve your problem and allow you to use your phone again.
if you cant connect to another phone via bluetooth then the chances are it wont pick up the bluetooth head set and you would be no better off
let me know how you get on or if you need further assistance ok
please rate this solution as i have a whole page of unrated posts, thanks
head phone symbol indicates on the right side of the display my lg8100 mobile. i have not yet connected any earphone to it how can i solve this problem/:?
the only thing you can try is select settings then select profiles try selecting general this should be your default setting. Try your phone and see if problem solved if not you will need to get the board cleaned and will need to send phone to repair shop to do sorry but this is all you can do
×