Question about Fujitsu (FPCRC04AR) Remote Control

1 Answer

Fujitsu remote control Model AR-DL10. I need to change the batteries. I can pull the slide down to expose the set/ swing/ energy save, but I think I have to pull it further down to get to the batteries. I don't want to force it and break it and it doesn't pull down. Is there a catch or lock to get to the batteries?

Posted by blenkeit on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How to get to the batteries in a AR-DL 10 Model Fujitsu Remote Control/ A/C

Pull it down to expose the controls inside.
To pull it down further to expose the batteries: PINCH BOTH SIDES OF THE slider at the top where it is knurled so it will bow out a little bit in the center AT the same time you may need to
slide an object under the slider to help it bow up a litter further.
WHILE DOING THIS: pull the slider further to expose the batteries. There are two plastic stops that the slider must clear to pull it down enough to get the new batteries placed. Before putting it back together: File down the two stops with a nail file so it is easier to do next time. - Who engineered this?

Posted on Mar 27, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My remote control is working i need replacement is for fujitsu air condition model #AR-RY6 or can i use different model

I find that most remotes from the same manufacture work on different models. Fujitsu is big enough where I think its worth a try.
0helpful
1answer

I have a model AR-DL10 remote. One of the batteries corroded , installed new ones and now the unit will not respond. What should I do?

Pull the new batteries and clean the terminals. If cleaning don't work the corrosion may have damaged the remote. Use a PC of sand paper, or scratch the surface that the batteries touch.
0helpful
1answer

Remote control model AR-DL10 does not work even with new batteries. does not have RST button.

The reset button on the AR-DL10 is the 'ACL' button. On my unit it is just above the Start/Stop button. On some of them it is in the battery compartment.
2helpful
1answer

Where can I find a new remote AR-DL10

Hi gdpotter,

Here's the LINK for the original remote control.

Hope I helped you.
Have a nice day!
Thanks for using Fixya.
2helpful
1answer

Can't open the remote controller on Fujitsu Model AR-DL4

Try tighly gripping both sides fo the slide down section to loosen it then slide it down wards.
31helpful
4answers

Remote unit slides open but cant find battery cover-model AR-DL10

When sliding the bottom part of the remote down, you have to lift it slightly (I did this with a letter opener - very carefully) to pry the door up from two stops that normally prevent the dorr from sliding down too far. If you look carefully, you can see what I mean.
11helpful
1answer

Wall Hung A/C unit remote control # AR-DL10 batteries died last. Replaced remote batteries with 4 new duracell batteries. Unit came back on but running to warm. I tried to figure out the programming of the...

I just got onto a technician who solved the problem for me. What he had me do was:-
  1. Pull dowwn the slider and use a pen to press the ACL button.
    That didn't fix it so...
  2. Take off the slider (the way you would to change the batteries). There is an ABCD slider switch and mine was set to "C". I moved it back to "A" and now it works! I am not sure how it got to "C" though ???
The other thing is I had been messing around with the "Manual/Auto" button under the grill on the wall unit. It was set so that the A/C was off. I'm not sure if that is significant.

Hope that helps.

Cheers,
Garry Rogers (ausgaz)
3helpful
1answer

Air Conditioner Model @AR-DL10

Open the slide cover and pull the batteries out. Next press the ACL button on the remote and make sure the ABCD slide is on A
Not finding what you are looking for?
Fujitsu (FPCRC04AR) Remote Control Logo

Related Topics:

2,835 views

Ask a Question

Usually answered in minutes!

Top Fujitsu Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76795 Answers

Cindy Wells

Level 3 Expert

6370 Answers

Joaquim Martins

Level 3 Expert

1128 Answers

Are you a Fujitsu Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...