Epson 76c, replaced lamp, doesn't come on, then replacment light comes on and high temp comes on, is there a reset i'm missing?

Is it hooked up to a network?

EPSON Powerlite Projector Lamp Replacement Cleaning and More

Original lamp USD110

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector
2,if the fans run, then ,check the lamp or lamp ballast

there is not the reset button on Epson 82
maybe the powersupply is fault
pls check it

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Possible that the projection lamp is faulty if the filter is clean and the fan blows well. You can remove and set back the lamp while doing so checck if there is any broken particles inthe lamp.
if so the lamp has failed for sure.
If not get a replacement/ or swap, to test and confirm.

Youve probably got something gone wrong with your dlp chip with the million mirrors on it, see when the mirror tilts away from the light you get a black shade- tilted toward light lighter shade now throw the color wheel in which gives you color youve got green and blue so the color wheel is fine. Now how to replace chip? Dont. Look for a digital board or video board replace that and that should take care of ya. Good luck hope this helped ya-

Blinking temp light means bad lamp fan. Needs replacement

if you know how to open the unit, try fixing its ventilation. flashing bulb light sometimes mean an occurance of overheating. try to clean all the fans and the air vent.

i can understand what is your mean