Region code in tv screen pic any one - Pioneer DV-300-K Player

You need to change the region code in the user menu under dvd settings.

hey. the manual has its region codes. we have the same problem. my dvd player says re61 and i don't know how to key in the code... i tried to press the 4 number codes but doesn't work. arrgh. makes me wanna throw it!

y DV-220KV-K, which is sold as a Multi Region DVD player has locked up on me. The following message comes onto the TV screen...

(Player's Region Setting)
<1> : Region
<2> : Region
<3> : Region
<4> : Region
<5> : Region
<6> : Region
Pick out any one of these!

The message remains on the screen ALL the time and I'm locked out of viewing anything. The remote is locked and so I cannot pick any of the region numbers!

1) Connect to TV
2) Power on DVD
3) Enter 7777 using remote
4) Use on-screen menu to change region code (region code 0 = region-code free)
5) Power off DVD

The DVD is now region code free.
or

The Hack Procedure:
- Power On
- Open Tray
- Press 9879 0 (0 stands for Multiregion, you may press buttons 1 to 6 to choose a specific region)
- A Message appears stating that "The Reg.No was changed to: [insert whatever region (0-6) you selected here]"

That's all, now you can watch every DVD you please... :)

or

Additional Information:
To get further info on your player do the following:
- Power On
- Open Tray
- Press 966
- This should show a screen listing RC, Firmware- and OS-Version, Manufacturer Label, etc.

insert the dvd disc from other region then the region code error will flash on the tv screen, then press the on screen button on your remote twice, then search search for the clock and set it to 0:00:00 and enter and it will automatically play.

1) Connect to TV
2) Power on DVD
3) Enter 7777 using remote
4) Use on-screen menu to change region code (region code 0 = region-code free)
5) Power off DVD

The DVD is now region code free.

Please be advised following procedure for set the region code to
multizone.

1. Power on the unit

2. Open DVD door

3. Press setup button on remote control.

4. Press right button on remote control 3 times.

5. Press 9653 continuously, then you will see the default region code on
the screen.

6. Select 0 to set region code to multizone.

1. Open DVD tray

2. Press the '0' key on the remote three times, waiting about one second
between key presses. The 'Region Test' screen will appear on the TV. If you don't
get this screen, then power off/power on again and start over.

3. If the Region Test screen appears, enter '0' for all-regions.

4. Press pause to save and exit.

Follow this link:

http://www.videohelp.com/dvdhacks?dvdplayer=LH-W750+&hits=50&Search=Search

Before performing any operations, make sure of the following: ? Check the connection with the TV. ? Turn on the TV and select the correct input on the TV to view the pictures or on-screen indications on the TV screen. ? For DVD playback, you can change the Setup menu setting to your preference menu... Alos, make sure thay the system and disc region code numbers are incompatible: The following discs cannot be played back: ? DVD-Audio, DVD-ROM, DVD-RAM, DVD-R, DVD-RW, CD-ROM, CD-I, (CD-I Ready), Photo CD, etc. Playing back these discs will generate noise and damage the speakers. * Note on Region Code DVD players and DVD Video discs have their own Region Code numbers. This system can play back DVD discs recorded with the color system of NTSC and PAL whose Region Code numbers include ?3.?