Driver for Octoedge DVD EW drive - Samsung DVD+RW / DVD-RW / CDRW COMBO 2MB-BUFFER (TSH552UCSBN) DVD Drive

Click start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver

you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard

if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer


Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer
Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps

Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer
Close all open programs:

Click on Start, Run, and type regedit and press Enter:
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer
Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. or
you might have to physically unplug the leads for this cd/dvd then plug them back this should activate the found new hardware wizard or
you might have to uninstall then restart your computer then reinstall your DVD/CD then reinstall the driver for this device:
if your computer came with a motherboard disk the drivers could be on it
click start control panel administrive tools computer management device manager scroll down cd dvdrom drives if you see a yellow question or exclamation mark?! or a red x right click you will need to update the driver or
select properties general troubleshoot, select driver click to reinstall drivers click update driver
hope this helps

if you are having problems with your samsung combo drive
if your computer came with a motherboard disc the drivers could be on it
make sure that the cd rw is getting enough power test all leads that are attached to the cd rw including electrical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or
your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this cd/dvd then plug them back in or
you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device
click start control panel administrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall

if this does not fix the problem it might be a registry problem

Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
After deleting the keys, close the registry editor
Reboot your computer
Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
hope this helps

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__4e3

MY dvd writer is reading DVD disks sometime and somtimes it could not making any response.what is the problem about this i dont know how to fix this problem.

try this official samsung site it should have the drivers that you are seeking.

http://www.driversquad.com/driver.php?option=h&prodid=270&cust=samsung%20DVD%20drivers_AD_www.google.com_&channel=h&subid=201_US*DR_SITE_ID&roia=!iicYvq1BAAKLOkMAAAYOVQAAZT5CAABnCA-A

You can also verify the users manual. Mostly you can see some code in the CD-ROM like: DVD-RW= Can write CD and DVD DVD-R= Can only read DVD's CD-R= Can only read cd's. CD-RW- Can write CD's only.

You can them from the company who made the dvd player.Try going to device manger in your control panel.Find your player & right click then click update drivers.Majorgeeks might to.

dot perform the format on dvd, just write wat u want using burning application

I'm afraid when a drive starts to eject the draw especially on boot up, it's a sure sign that the unit is faulty and needs replacing.