I just changed my black ink cartridge and I keep getting a message that reads: pree enter to align catridges. Each time that I press enter the test runs and the screen reads alignment failed. HELP

Pls refix ink catridges again.may be ink catridges are not fix properly.

Try arrowing down on your screen to maintenance press the tick to select maintenance and then scroll down to align catridges. see if this works

Put a teeny tiny bit of oil (3 in one on fingertip) all over the slide (chrome bar that you see looking into the printer from the front) and retry. Just a thin film, NOT enough to drip.

The self test and align 'scan and print' procedure is timing out.

You must replace both ink carts to get an alignment.

You can also bypass the alignment. When the message for alignment displays on the display => Press Setup and Options (or Copy Options ) simaltanious.The last known alignment is used when the alignment is bypassed.

PRESS SET UP & OPTIONS AT THE SAME TIME. WILL CLEAR MESSAGE.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=
c00042820&cc=ca&lc=en&dlc=en&product=79499

i don't have driver
i want to load driver printer hp psc2210

my hp psc 2210 after putting in new cartridge keeps saying press enter to align cartridge. it keeps repeating the same reading.

you can bypass when asked and use last good settings by..Press and hold the Enter button, and then press Menu

 

This problem is caused by incorrect alignment page print out caused by faulty cartridges, ideal fix is replacement of all ink carts

 

HP have a webpage dedicated to this...h10025.www1.hp.com

Also get on your gloves get out your vac and suck on the carts till a little ink comes out, make sure colour cart releases all 3 colours then reinstall, can get messy.