Green hue on all inputs

Hi:
You may have a problem with the inverters in the unit, they are responsible for lighting up the back panel. Check or have checked the power supply voltage to the inverters, should be around 18-24 volts DC. Also leaky capacitors on the power supply will cause this issue as well as leaky or puffy capacitors on the inverter.

Optical Block in your TV is going bad. If you don't have any extended warranty - It is pretty expensive repair and is not worth of fixing it in most cases.

See if you have kept anything magnetic around the tv ... How's the warranty ?

I think I have a solution involving far less effort. Have you tuned your picture settings? Out of the box, the settings are ok and the presets will do the trick for most. But if you're like myself, you want the best picture possible. Here are my settings:

Picture menu:
Aspect ratio: Just Size
Energy Saving: Off
Picture Mode: Expert 2
Backlight: 35
Contrast: 90
Brightness: 54
H Sharpness: 40
V Sharpness: 42
Color: 50
Tint: 0

--Expert control menu
Dynamic contrast: Off
Noise reduction: Off
Gamma: Medium
Black level: Low
Real Cinema: On [grayed out]
Color Standard: HD [grayed out]
Color Gamut: Standard
Edge Enhancer: Off
xvYCC: Auto [grayed out]
OPC: Off
Expert Pattern: Off[grayed out]
Color Filter: Off

White balance: Warm
Method: 10 point IRE
Pattern: Outer
IRE: [see below]
Luminance: 137

-- 10 point IRE calibration
IRE: [Red, Green, Blue results, respectively, for each IRE point]
100 [-8, 1, -40]
90 [-13, -5, -40]
80 [-20, -12, -40]
70 [-17, -14, -33]
60 [-17, -12, -31]
50 [-17, -13, -26]
40 [-13, -12, -19]
30 [-6, -4, -8]
20 [-6, -4, -10]
10 [2, 3, -1]

Color management system
Red color: 2
Red tint: 0
Green color: -1
Green tint: -7
Blue color: 2
Blue tint: 7
Yellow color: 0
Yellow tint: 1
Cyan color: 0
Cyan tint: 0
Magenta color: 0
Magenta tint: -2

These are taken from CNET.com

Three guns Red Blue and Green in the picture tube of an old CRT set. If one of the guns goes out it effects that color. Sounds like one of the guns inside of the tube is going out, To costly to replace for such an old antilog set that will have to have a convertor box next month anyway.

Hello
You will have to a tec. for this one as you have lost half of your vertical sweep.
Sorry
guy9

The green hue (I had it too) is a result of the optical block failing.
Sony has extended their warranty (regardless of the purchase date). see link

http://esupport.sony.com/US/perl/news-item.pl?mdl=KDSR60XBR1&news_id=185

Do you have external speakers close to the TV? This may be the cause.

Try another HDMI source and swap cables; see if that's it. The other fix is to repair the HDMI input amp/buffer on the set...accordianman

I think the problem stems from the HDMI port and scart ports, i have read somewhere on a sound and vision web site that these two conflict and when HDMI is in it only sometimes blocks out the scart signal. This could be what the problem of the freezing is, as when all said and done its just a very large pc monitor; and look at the trouble they can get in!.