Owner left a Duracraft air heater in home, model CZ 600. I am not familiar with it, and need instructions on how to use it. Does it require water, or can I just plug it in?

You need to stop using the heater, , the thermostat is bad and there is a risk of a fire, and no repair parts. Replacement heaters range $20-40.. Personally I would look at a different brand.

duracraft model cz 1200 Questions & Answers (with Pictures) - Fixya

www.fixya.com > Forum > Tags

Jan 3, 2010 - Duracraft CZ 600 oil filled fanned portable heater and has two switch on end for different watt ... It is white portable electric,but it has oil in it, do . ... looking for replacement parts for a Duracraft model s6436 sander I am looking for a ... I need replacement moter for Duracraft Model DS1600 fan can I get a replacement motor? Where can I find parts for a Duracraft window fan ...
11 answers
Aug 16, 2010
Duracraft User Manual
10 answers
Sep 24, 2009
duracraft fan parts Questions & Answers (with Pictures)
5 answers
Sep 4, 2009
SOLVED: Can't get at the fan to clean
10 answers
Apr 14, 2008
More results from www.fixya.com

On my water heater, I have two feed, one at the bottom side for cold water and one at the top for both the safety valve and hot water. Do some search on internet to look At your model schematic and instruction.

I'm surprised the building inspector allowed the condensing furnace you described draw combustion air from the garage !! I'm not familiar with any manufacturer that recommends that as normal practice. Virtuall ALL two pipe condensing furnaces require both pvc pipes to be terminated OUTSIDE the structure with specific heights and distances apart. There is also a limit to the length of both the flu and the combustion air piping and each 90 degree pvc elbow adds the resistance equivalant of roughly 10' of straight pipe. If re-routing is required, you have to bear in mind the direction of 'fall' in the piping usually goes back towards the furnace and remember two 45's may give you a greater variance of change in the piping and still be equal to the equivalant of one 90.

Personally, I would never suggest terminating the fresh air (combustion air) intake between floors of a structure.

does the light on the switch come on?

Look carefully at the plug's connectors to see if thewre is any scorching or otherwise burnt metal...electrical connectors tend to get hot due to the plug being loose(this causes more resistance and thus more heating). As a safe bet...the parts aren't expensive...I would replace both the power cord on the heater AND the outlet recepticle

I'm in the same boat..are we the only ones who have one?

Go to the hardware store and match them up, they have toggle switch. Get the heavy duty 20 amp switch.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c