SOURCE: scanner error see your docmentation and call service if necessary
Please follow the steps below to resolve your issue.
1) Turn off the printer.
2) Lift the scanner cover.
3) Toggle the transportation lock five times, ensuring that it is in the unlocked position, towards the back of the scanner.
4) Turn on the printer, and the error should be cleared.
SOURCE: Epson Stylus Photo R300 has error
You actually need to change the ink absorber.
Heres a video on how its done on the R800.
Please refer to your manual for proper localization of the ink absorber.
Doing this will get you to move on
SOURCE: It reads Printer Error - see your documentation
this means your printer waste pads are full and the printer needs to be reset for it to work again or it can just be reset
SOURCE: our epson stylus rx500 printer has been saying
I held down the three keys mentioned by rioglen but when the printer came back on, it showed the message 'copy endurance', I pushed the select button to the right I think 4 times until it showed 'rst ink OCD', I then pushed the 'color' button, it then showed to turn off printer, I did this and all was ok!
777 views
Usually answered in minutes!
×