Question about Canon PIXMA MP130 All-In-One InkJet Printer
How do I fix the service error 5200
I have problem with Canon Pixma IP1500.
System show me ERROR 5200, What means this service error?
Posted on Sep 15, 2008
Please help me as I have misplaced my user guide and need to fix this error
Posted on Sep 17, 2008
SOURCE: Error Number 5200 Printer Error
How Reset Canon PIXMA error 5200: The printer is turned off and plugged the power cord. Press the button STOP / RESET and hold, then press and hold the POWER button. POWER button is pressed, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed. Release both buttons simultaneously. Press the power button, then the printer will off Press the power button again, then the printer will be lit and ready for use.
If this does not solve the problem, here is another method:
I have found a solution for your problem. (1) With the printer turned on, unplug it (2)Open the top and bring the ink cartridge holder to the middle (3)Raise the gray bar and remove the print head assembly with the cartridges in it (4) Lower the gray bar with the head missing and close the top with the head out (5) Restore the power,wait til the printer wakes up (6) It will tell you to put in the cartridges (7) Restore the print head, close the top and the printer should resume working.
Posted on May 03, 2011
SOURCE: Service error 5200.
The 5200 series error indicates an unrecoverable hardware error. Canon does not have any specific recommendations or further information to advise on this other than to unplug the printer for thirty seconds then plug back in and power on. If the error still remains unresolved, it will likely be more cost effective to replace versus service.
Posted on Feb 20, 2009
1. hold RESUME then press & hold POWER
2. release RESUME, then press it twice, the light should go amber then green again.
3. you're now in service mode (you can release POWER now)
for reset waste tank reset is 4 presses of the RESUME button. To confirm, press POWER once
Hope this helps. Please rate my response.
Have a good day.
Posted on Mar 26, 2010
SOURCE: Service error 5200. on a
Orange error 5200 Abnormal head Green temperature error The head temperature (output of the diode sensor 8 toggle blinks in the head) is close to the threshold Print head, logic board. this mean buy a new (:
Posted on Aug 13, 2011
SOURCE: service error 5200 canon mp240
Error 5200 indicated an error with the print head. Try to cleaning all contacts on the print head as well as on the connecting pad. And also the power needs to be restated, so do it and try it again, just take out the USB, the power from the wall outlet and the USB in the printer itself.
Thanks Good Luck
Posted on Sep 17, 2009
Tips for a great answer:
Nov 24, 2013 | HP LaserJet 5200 Printer
Jan 14, 2012 | Canon PIXMA Office Equipment & Supplies
Sep 23, 2011 | Canon PIXMA iP3600 Photo Printer
1. Turn Off
printer, cable power still plug in.
Stop/Reset button, don't release the button.
3. Press Power
button by holding without release and than release Stop/Reset Button.
Stop/Reset button two times (2x) now release the Power Button.
5. Wait until
service mode to zero (0).
6. Turn off
the Printer, cable power still plug in.
Stop/Reset button, don't release it.
8. Press Power
button don't release & than release Stop/Release button.
Stop/Reset button four times (4x), wait until service mode to "1"
10. Turn off
printer, and loose cable power, wait for one (1) minute.
11. Connect cable power, turn on printer again, now this printer ready to use.
Aug 23, 2011 | Canon MX300 Office All-In-One Printer
Aug 04, 2011 | Canon Pixma MP500 All-In-One InkJet...
Mar 07, 2011 | Canon PIXMA MP240 All-In-One InkJet...
Oct 01, 2009 | Canon S400 InkJet Printer
Sep 28, 2008 | Office Equipment & Supplies
Aug 10, 2008 | Canon LASER SHOT LBP-5200 Printer
10,827 people viewed this question
Usually answered in minutes!