Oki c3200 printer driver download for window 7

Hello try to renew the driver from here:

http://my.okidata.com/pp-C3200n.nsf

Good luck

Hey, it took me hours, but this is indeed the solution:
http://my.okidata.com/PP-C3200n.nsf?opendatabase

Install PrintSuperVision Asistant and you have all you need.
You can see how many pages you have printed, how much of each toner and drum are remaining etc.

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

All toner, drum, fuser and transfer figures return to 100%.

Hope this helps
Positive Feedback ALWAYS Appreciated :)

Ya more than likely they didn't make a drive for your OS.

hi there louis,

chat got disconnected. can you terminate session and ask for another session again?

Thank you.

virtualhost

Please follow Microsoft recommendation and check the Microsoft Compatibility list (search it). If your printer is there, you have other troubles. If yor printer is not listed there ... Check Oki web site for a driver for Windows 7 to run your printer. If Oki doesn't support it, this is the end of the road.

Your options are, a) get a second computer with a OS that supports the printer and share it on a network. b) upgrade your printer.

Others may tell you there are 3rd party drivers and there may be a driver. Good luck with that.

Thanks for your interest in FixYa.com

pls try to upgrade the firmware carefully

Check our USB cable. It should contain AWG marking on it. Depending on AWG number there is a limit to USB cable length as follows:

28AWG = 0.81 m
26AWG = 1.31 m
24AWG = 2.08 m
22AWG = 3.33 m
20AWG = 5.00 m

Make sure your cable does not exceed the maximum length according to its marking. Replace the cable if it exceeds the length.

http://www.oki.co.uk/fcgi-bin/public.fcgi?pid=9&cid=125&pdflag=2&prid=465&OSId=16&languageId=1&type=1&#drivers
U can download from here then install.

Here are Mac drivers on this link:

http://my.okidata.com/DSDownWeb.nsf/(MOC-C3200n)?OpenView&Start=1&Count=30&Expand=12



Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309