Hello
I have a request.
Could you tell how to reset time lamp in LG projector with type RL-JA10?
Waiting on your news.
Jarel
SOURCE: lamp reset LG RD-JT40
Try to do this, press the ENTER button on the TV and the MUTE button on the remote at the same time. After 5 seconds the screen should come up and it will read "Lamp use time...Total lamp use time ....lamp reset" Press the center button on your remote (the circle button right in the middle of the four directional buttons) and you will be reset to -0- again. Your orange light should now be off.
Good Luck.
SOURCE: Please show me how to reset the lamp of LG LP XG2 Multimedia Projector
These instructions are taken from page 44 of the User Guide.
Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as below.
Press "Up Arrow", Press "Down Arrow", Press "Left Arrow", Press "Right Arrow", Press "Menu", Press "Enter".
Lamp time will be initialized.
SOURCE: LG RD-JT 21
Hi Mike
Press the following buttons quickly - Up , Down , Left , Right , Menu & then Enter - this should reset the timer.
SOURCE: resetting lamp on a lg rd jt40 projector
remove bulb. replace bulb. within ten minutes press exit on projector and hold for three secs. then immediately press menu then press left or right arrow button. you are done. turn off then turn on
SOURCE: how do i reset my lamp timer on LG RD-JT30
unfortunately, lg won't tell anyone outside of their service center how to do this. they even recomend that you send it to them. it's their way of ensuring return business. sorry.
123 views
Usually answered in minutes!
×