My Samsung SyncMaster 753S 17" CRT Monitor cable is internaly broken from the connector pin. so what can i do? is it available?

Hi, The Samsung SyncMaster 753s is a 17" CRT Monitor that has a native resolution of 1280x1024 and with exterior dimensions of: (WxHxD) 16.2"x16.4"16.5"
Hope this helps. If it does, please accept and rate the solution! Contact me with any more questions you may have. Thanks for using FixYa!

You can get service manual here: http://elektrotanya.com/?q=showresult

Pink - red input - pin 1 green - green input - pin 2 blue - blue input - pin 3 ground shield wire - pin 6,7,8 and 10 black - ddc 5v - pin 9 violet - screen raster - pin 11 white - data or sda - pin 12 orange - clock or scl - pin 15 yellow - vertical signal - pin 14 clear - horizontal signal - pin 13

I want to fix new vga connnector on my smsung syncmaster 753s monitor and i am confused with colour coding please help me

width problem. screen cuts from both the sides

make sure your pins on your mail connecter are 100% ok,then u
UPS of that system place far from the moniter .Insert VGA driver cd into drive and driver update via device manager and restart u r
system.In case ur graphics card damaged the moniter normaly
work as u describe.

Check vga cable (check vga port pins continuity with its wire inside monitor on video section that is placed on crt neck)If it is ok then check transistors in this section.
Hope this solution works

there is 2 lock on front side first remove back side lock or scrow then insert small pin pull up back cover your monitor will get open
ashok

i think you should checkthe signal cable for continuity in particular the green signal wire