SOURCE: jensen vm9411 no sound
Check to make sure your vehicle does not have a factory amplifier. If you used a fit kit with wiring harness. try looking at how many wires were used in the factory unit compared to haw many you are using now. see if there are extra wires in the vehicle. If there is extra wires it is a pretty good clue the vehicle has an amplifier and will have to be rewired.
SOURCE: how to hook a zune to a jensen car viedo screen
you can buy a cord that hooks into your head set jack and the other end is A/V cables and you can hook it up to one of ur video inputs, this way you could also watch your videos on there also, the cord runs for around 15 dollars and you can buy it at gamestop or radio shack
SOURCE: Jensen head unit VM9311TS no sound from CD
Should wire HU's Power Const to Amp's Remote On. Instead you wired HU's Power Antenna to Amp's Remote On. So the stock amp got triggered only in radio mode.
SOURCE: Jensen vm9512hd e-brake bypass
the pink wire on the unit is for the E-brake.... ground it out somewhere and that will bypass the brake and fix the problem.
90 views
Usually answered in minutes!
×