Question about Hoover Nextra HNWL 3136 Front Load Washer / Dryer

1 Answer

Drum loose so very noisy on spin cycle - Hoover Nextra HNWL 3136 Front Load Washer / Dryer

Posted by djt_2010 on

Ad

1 Answer

D. Floyd Kolb

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hoover Master
  • 43,501 Answers

Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front load washers can make..

Washer Problems Washer noise when spinning
heatman101

Posted on Aug 29, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Noisy spinning


First make sure that the load is balanced, if you are washing and spinning a dense load like trainers etc this can cause an imbalance. If you are washing a duvet cover or a pillowcase, make sure that the loose clothes washed with it haven't migrated inside the cover or case, this happens so easily. It is always worth checking that the support feet are all touching the ground when the washing machine is empty as this can cause excessive noise
hope this helpsKind regards ki

May 11, 2015 | Washing Machines

1 Answer

Washer is noisy in spin cycle and won't spin water out


but clutch or loose worn belt, also check bad motor coupler

Aug 02, 2014 | Maytag Bravos MEDB400VQ 29" Electric Dryer...

2 Answers

During the spin cycle the washing machine becomes VERY noisy, sounds like its off-balance, but happens EVERY time, even with very small loads. The whole unit doesn't move when it happens, just extremely...


During the spin cycle the drum moves at a higher RPM and so the counter weight of the clothes within can make the drum rotate eccentric or out of sync.
So check if the belt is loose on the motor, checck if the spindle is tight with friction or the drum assembly suspension is out of alignment.
You must check the reason with the following points to confirm the drum spinning making noise. check point of noise , is this on hitting the sides , or from the motor, any foreign objects or the drum spindle. But you are the judge with a first view. Use good lighting to look out and confirm the fault.

Sep 16, 2010 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Loose drum


If your machine is a front load washer, and it's a few years old a loose drum which is noisy, probably means that the bearings at the rear have collapsed.Water gets through the seal and goodnight bearings and probably the shaft as well......Sorry......Nomess

Apr 18, 2010 | Washing Machines

1 Answer

Our Hotpoint WF321 1200 spin is just 3 years old and now makes a very loud noise when in use - both for the washing and spin cycles. is the drum loose / off balance? any help appareciated


Remove lower rear cover of washer, remove drive belt, and from the front spin drum by hand, if it feels rough, or is rumbling, or noisy, then the main drum bearings are failing.
This is a major repair!!!.

Mar 13, 2010 | Hotpoint Washing Machines

1 Answer

Very noisy on spin cycle only


Hi, please describe the type of noise you are hearing. If it is a grinding type noise, it is likely to be the drum bearing.

Oct 25, 2009 | LG WM1814CW Front Load Washer

1 Answer

Ariston Margarita 2000 NOISY spin cycle....


Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

Jul 24, 2009 | Ariston Technologies Ariston AWD12 Front...

1 Answer

Hotpoint wma76 front load very noisy on spin cycle


If the machine is only noisy during the spin cycle then it is probably not the bearings, more likely it is probably the same issue I had. There is a large weight attached to the top of the drum, in my case it was loose. A simple fix, remove the lid and tighten the three bolts. The lid is removed using a T20 star key, you can buy these at places like Homebase or B&Q (about £7.50 for a set of 10 different sizes). There are two little plastic lugs on the side of the lid, the screws are behind these, remove them and then pull the lid forward and up. The weight is obvious, it looks like an odd shaped brick and is bolted down with three bolts. In my case the front one was loose.

Oct 13, 2008 | Hotpoint WMA76 Front Load Washer

2 Answers

Noisy spin loose drum


drum bearing need need bearing kit and drum support £60 plus labour at similar price. Appliance Doctor

Feb 02, 2007 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hoover Nextra HNWL 3136 Front Load Washer / Dryer Logo

315 views

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Mike

Level 3 Expert

4376 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...