Lexmark all in one series x6570

It coudl be a printer driver issue. Please follow the steps below to fix the problem.
First, uninstall your existing print driver. On your computer, go to Start menu > Programs > Lexmark 6500 Series > Tools > Uninstall. After the uninstall process, reboot pc when prompted.
Second, visit the Lexmark website to download and re-install the Lexmark X6500 printer driver. Select your operating system > download > execute the file. Follow the instructions on your computer screen.
Lastly, after the re-install process, try to print again to verify that the problem is fixed.

Make sure the Lexmark X6570 printer driver is installed on your iMac desktop. You can download and install the X6570 printer driver by visiting the Lexmark website at http://bit.ly/hVA0vj. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

The Lexmark X6570 printer uses these cartridges: - #41, #41A, #42, #42A, #43XL, #44XL
Follow the steps below to fix the problem: 1. Remove the print cartridge that is indicated and close the cartridge carrier lid. 2. Close the scanner unit. 3. Disconnect the power cord from the electrical outlet. Wait a few seconds. 4. Reconnect the power cord to the electrical outlet. 5. If the power button is not lit, press it to activate. 6. Reinsert the print cartridge and close the cartridge carrier lid. 7. Close the scanner unit. 8. If the error reappears, then it could be a faulty cartridge. Replace the print cartridge with a new one, close the cartridge carrier lid, and close the scanner unit.

Use the Check symbol instead. Here's the Lexmark 6500 Series User's Guide to give you a more detailed instructions on how to use the Fax feature for your X6570 printer.

Have you tried using the X6570 and X4800 Series driver for Mac from the Lexmark website? You can download them from the Lexmark website using the links below:

- Lexmark X6570/X6575 Series for Mac 10.6
- Lexmark X4850/X4875 for Mac 10.6

If you encounter any problem downloading or installing the drivers, please don't hesitate to contact Lexmark technical support for additional assistance.

Hi,
you're going to need the installation cd for that OCR software. It can't be downloaded online since it's a big file. You might want to call Lexmark on their toll-free 1-800-LEXMARK for the cd. Hope this helps.

Hi,
you can go to printers and faxes (XP) or printers (vista) in control panel Right click on the printer and click on properties. Go to advanced tab and click on printing defaults. It will pop up the printer printing preferences. choose the desired setting. To disable 2-sided printing, go to advanced tab in the preferences window and turn off the feature. Click ok to save all settings. Go back to general tab and click on printing preferences and set desired settings if there is a need. Click ok to save settings. Then, for all changes to take effect, click ok button on the lexmark 6500 series properties window. Try to print again. Hope this helps.

if you have abby fine reader installed try that software. if not go to start- all programs- lexmark x 6700 series (it depends of the familly class model. mine's a x5100 series)- Lexmark All-In-One Center.

goto avery website and download designpro for free it has all the templates for avery stationary

Good day.
Usually that happened once the printer was not set to default setting after it was installed.
To set to default, click start, choose printers and faxes, select the lexmak pinter, click file select default printer.

To test your printer if it print.
1. right click the printer icon
2. select properties
3. click print test page

Thanks.