Windows 7 automatically found and downloaded the software I need, but how do I transfer the pictures? Nothing comes up on the screen when I connect the camera and I don't know which Canon option to use.

A new, free software update available for your Kindle Fire HD 7" (2nd Generation). This update automatically downloads and installs on your Kindle Fire when connected wirelessly; however, you can also manually download the software and transfer the update to your device via USB cable.

Swipe down from the top of the screen to open Quick Settings, and then tap More.

1. Download & Install Software Updates Automatically.

Swipe down from the top of the screen to open Quick Settings, and then tap Sync. The software update automatically downloads in the background, and installs after the download is complete and the device is asleep. Your Kindle Fire will restart during the software update. After the restart, the message"Kindle is upgrading" will appear on the screen.

Plug it into the Zune software and perform a synchronization. The zune software is available here: http://support.xbox.com/zune/software/download
Follow the setup, and they should automatically be transferred upon synchronization. You can also enable auto-upload to SkyDrive, and you will be able to download any pictures you take on your phone onto your computer through SkyDrive.

I have researched with your model and found that drivers are not available from the manufacturer. However, most of the Still cameras do not require driver or software to transfer images now a days.

Once you connect the Camera to the computer, you will get the Camera as a removable drive under My Computer. You can open the removable drive to see the pictures stored in the Camera/Memory Card.

If the Operating System installed in your Computer still needs a driver, you may use the Memory Card slot on the Computer to transfer the pictures. Please follow the steps to transfer pictures using Memory Card Reader in the Computer:

- Remove the Memory Card from the Camera.

- Insert it in the Memory Card slot in the Computer.

- Open the pop up window or find out the removable drive under My Computer.

- Copy the required files to a folder in the Computer.

Note : Most of the Notebooks comes with its own Memory Card Slot. If it does not, you may get one from the market without much spending.

Thanks for understanding.

Please let me know if you need further assistance.

According to Logitech, the Harmony Software version 7.6 is compatible with Windows 7 as is your Harmony 890. You may need to download the 7.6 version of the software. All of your settings should transfer over to the new software, since your profile is stored on Logitech's server.

You do not need any Driver or Software to transfer the images from the Camera to the Computer.

1. Set the USB Connection or Transfer mode setting in the Camera menu to Mass Storage or Normal .

2. Connect the Camera to the Computer using the supplied USB cable or any USB cable.

3. The Computer will recognize the Camera (make sure that the recording media containing the pictures (Memory Stick) is inserted in the Camera).

4. Click the Start button and then click the "My Computer" icon (for XP Operating System and for Vista or Windows 7 it will be "Computer" icon).

5. In the "My Computer" or "Computer" window, click the icon that represents the Camera.

6. Click the "DCIM" folder and drag it to the desktop screen of the Computer to transfer the images from the Camera to the Computer.

However, you may download the supplied Picture Motion Browser software for the Camera from this Link.

http://esupport.sony.com/US/perl/swu-download.pl?upd_id=4598&mdl=DSCW55


Good Luck!!!!!!!!!!!!

Hi Deepak,

I think you have downloaded the driver for windows XP 32 bit OS, and i think that your PC supports Windows XP 64 bit Operating System.

Click here to download the software for Windows XP 64 bit Operating System.

DOWNLOAD (x64Drv5.64.0.17.exe)

Installation Instructions: USB Connection
1. Download the x64Drv5.64.0.17.exe file.
2. Once downloaded, choose Open or just run the x64Drv5.64.0.17.exe.
3. Follow onscreen instructions listed below.
Note: There may be a long pause between each of the steps below.
4. Choose Direct Connect.
5. Power on the printer, and connect it to the computer when prompted.
6. The "Found New Hardware Wizard" will be displayed.
7. Select No, not this time.
8. Select Install the software automatically (Recommended).
9. Depending on your product, you might see one or more Windows' warning screens.
10. Click Continue anyway or Yes each time these Windows warning screens appear.
11. Click Finish.
12. Reboot your computer (Highly Recommended).

Installation instructions: Wired and Wireless Network
1. Download the x64Drv5.64.0.17.exe file.
2. Once downloaded, choose Open or just Run the x64Drv5.64.0.17.exe.
3. Follow onscreen instructions listed below:
Note: There may be a long pause between each of the steps below.
4. Choose Network.
5. Choose your printer after the installer has identified it on the network.
6. The "Found New Hardware Wizard" will be displayed.
7. Select No, not this time.
8. Select Install the software automatically (Recommended).
9. Depending on your product, you might see one or more Windows' warning screens.
10. Click Continue anyway or Yes each time these Windows warning screens appear.
11. Click Finish.
12. Reboot your computer (Highly Recommended).
Thanks

Rizz

Have you checked the HP hep site?
Here is their suggestion
Introduction This document explains how to transfer images from the camera to a computer running Windows XP operating system by using a universal serial bus (USB) cable. Transferring the images Follow the steps below to transfer images from the camera to a Windows XP computer. Step one: Connect the camera to the computer

1. Turn off the camera.
2. The camera came with a special USB cable for connecting the camera to a computer. Connect the large end of that USB cable to the computer. Figure 1: Connect the USB cable
3. Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.

Step two: Transfer the images Choose one of the following methods to transfer the image files: Method one: Transfer images with the HP Photosmart software

1. Make sure the HP Photosmart software is installed on the computer. If the software is loaded, then go to step 2. If the software is not loaded, click here to upgrade to the latest version of imaging and printing software (in English).
2. If images on the camera are selected for printing or selected for HP Instant Share destinations, make sure the computer is connected to a printer and the Internet.
3. Turn on the camera. The HP Import Photos software starts on your computer. If you have set the software to automatically transfer the images in the camera, the images automatically transfer to the computer. Otherwise, in the Transfer images from Camera/Card screen, click Start Transfer . The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started.
4. When the Image Action Summary screen appears on the computer, you can disconnect the camera from the computer.

Method two: Transfer images without the HP Photosmart software If you do not, or cannot, install HP Photosmart Software on your computer, you can still transfer images from the camera to the computer using the Picture Transfer Protocol (PTP) in Windows XP. Follow the steps below to transfer images.

1. Turn on the camera. Windows will automatically launch a program to transfer the images.
2. When the images have finished transferring, disconnect the camera from the computer.
3. If you encounter problems, check that the camera USB Configuration in the Setup Menu is set to Digital Camera .
   1. While in Live View , press the Live View/Playback button, and then press the Menu/OK button.
   2. Scroll to the Setup Menu using the left/right arrow buttons.
   3. Use the up/down arrow buttons to scroll through the Setup Menu to highlight the USB option.
   4. Use the left/right arrow buttons to change the setting to Digital Camera and then press the Menu/OK button.
   5. To exit from the Setup Menu , press the Live View/Playback button.
4. Reconnect the camera to the computer.

it is very simple when u connect ur camera to pc through data cabel u seen dat dere is some driver automatically u need not ny software to connect to ur pc...
if u r using windows xp....
when u connect it automatically ask u to copy images......
if it not ask then u hv to transfer ur picture through cardreader...

but it can be used to transfer ur memorycard pictures..

No need for you to install any CD software because your camera
will be recognized automatically as a removable disk when your computer has the following Operating Systems.

For transferring pictures with OS (Windows 98/XP/Vista/2000/MAC 9.2-10.3 ):
- Turn off camera
- Plug USB cable to camera and PC
- Turn on camera
- Connect to computer or printer will come out on camera screen
- Select the desired one
- Press MENU/OK
- "New Hardware Found" will be seen on the right lower corner
- A window will pop out with various options
- Example: "Open to View Files", "Copt to a folder"...

* If nothing like those mentioned above happened,

Double check through Computer Devices with Removable storage:
- Look for DCIM folder in any of the Removable storage
- Select 100sscam folder inside DCIM folder
- Upon opening, all pictures will be viewed

Just try to make sure that you'll be using the USB cable supplied
in the package and your PC does have good working USB ports.