Printer prints just part of sentences

hi arun

Well printing from middle page this is a problem with the settings in the computer.

Where as the line space is concerned this is due to PF (Paper Feed) gear which needs to be replaced if worn out or broken in some cases. This is a gear on the left side of the printer and it has a dedicated motor to turn it.

did you ever get it fixed? im having the same problem....

Take the toner cartridge out, shake it back and forth, and turn it around in a circle a few time. Put it back in the priter, and print. Order a new toner cartridge.

If this is an inkjet printer, ignore this response.

Did the document print in full even though it left blank spaces? I f so the problem is The Page Break Occurred before it actually reached the end of the paper. Check what paper is selected on the printer. I don't mean the tray or paper feeder.
On the LCD screen on the printer go through the menu till you find the paper. Make sure the paper is set to A4 or Letter (whatever you normally use.) and make sure this setting matches with the paper select in the documenent.
Check File ->Print ->Settings or Options .... Find out where the paper is mentioned and select A4 or Letter as the case may be.
Hope this will solve your problem
Good luck
luciana44

Some head sprayer is clog. Check nozzle? Do head cleaning. Check again. If nozzle output is not badly, you can print with photo quality for good output.

Make sure printer is set for "non-continuous" supplies(media).
Also try calibrating printer. You can download a quick reference manual at zebra.com

the problem is that some of the pins on the print head is jammed. replace the head and you will be printing fine

Seems like a problem with the printer head...It is usual for matrix printers and it happens due to wear and tear..You will have to get the printing head to get replaced..

Remove the right ink cartridge (color). You will get an error saying the cartridge is empty, but ignore that. Hit cancel on your printer. Print your job...when your print screen comes up, under preferences check the box for print colors in black and white. Your printer should print just fine without the color cartridge. Ignore the flashing red light.

Could be a partial block - print a block of color and look for blank spaces in it, if you get them, then you should unblock the nozzle and the print head. Clean them with hot distilled water, and to be on the safe side clean the contacts as well. Good luck!