In need of a muffler for a 2800 watt easter steel generator, anyone know where to get one

Hi!

We would be happy to help you identify the generator and get the parts for you. Just contact us on our website: https://www.generatorguru.com/need-help/
Our Generator Engineers are happy to assist you.

Regards,
The Generator Guru Team
www.GeneratorGuru.com

This generator will run an a/c unit up to 13500 btus and is good for 2800 watts. This is a small generator, the nameplate rating numbers need to jive before overloading the energy supply.

Sorry do not have pictures but we are happy to assist you. What do you need to know?
Parts Spares for Generators and Small Engine Machinery

If the studs are there to hold it all in place then just buy the correct ( metric probably) nuts for it.

http://cdn.powerequipment.honda.com/pe/pdf/manuals/31ZT7601.pdf

I would check spark arrester and clean it and the muffler first.lt could be the inverter unit. If you have a meter determine the output voltage, and freq. You would need a scope to look at waveform the repair should be lest to a repair center. suggest you call Honda for more guidance.
You could spend a lot of money on maybe parts./

Your cutter machine may use more power than your whole house depending on the size of motor. A one horsepower motor 115v will use about 3000 watts to start and about 1000watts to run. To estimate how much power you need, add up all the watts that you will use at home and add to that estimated wattage of the cutter motor (motor will use 3x rated wattage to start plus loss of power thru the extension cord). Buy a generator that will give you needed power and still have a 25 percent reserve. If you need 2000 watts on a continued basis, the 2800 watt may be good, however I would be more comfortable with a 3500 watt if the price was right because of the cutter machine. I would consider converting the cutter to gas power and buy a smaller generator to save on gas since you will be most likely running the generator far longer to power the house. Good luck

Try this site: www.shopping.com/sunpentown-tg-2800-generator-parts/products

YOU LOCAL LAWN MOWER SHOP. YOU WILL FIND THAT THE HOT DOG MUFFLERS ARE THE CHEAPEST.. THAT MOTOR SHOULD HAVE THREADS SO IT WILL SCREW RIGHT IN.. TA-DA FIXED FOR WELL UNDER 10 BUCKS.. COOL HUH//
DO ME A FLAVOR, IF'N I WAS OF ANY HELP LET ME KNOW OR VOTE
TRY TO BUY PRODUCTS MADE IN THE GOOD OLD USA ... Jay

1 Check the oil..... i.e full

Unhook one of the wires on the oil sensor and see if you NOW have spark.

I don't know why a lawn mower shop could not fix your generator. I certainly fixed my share of them during my lawnmower repair shop days.

Half of the problems I ever saw with generators is that they for a number of reasons would not start.

Thanks for using FixYa!

Kelly

you have got a china copy, hard to get bits for.
whats the prob u got with yours