Hi ya! I am in Australia we just purchased a quick cam notebook. When attempting to use the vedio recording this error code keeps coming up. We cannot use the video recording. Can you assits me. Thanks, Anthony getting error code 0x000001fe, cannot video capture
I reran the audio tuning wizard for the webcam. It didn't pick up my voice.
Therefore, I updated the audio driver in device manager.
The problem has now gone.
Matt IT
According to Logitech,
"If you receive "Error code = 0x000001fe" when trying to record a video,
please re-run the Audio Tuning Wizard and select an available audio
recording device."
Sometimes reinstalling the WindowsMedia software or upgrading to WindowsMedia 11 also resolves this issue...its got something to do with codecs. You can download the full codec package HERE. Simply double-click the setup.exe file and follow the on screen instructions.
Should this fail as well, please download the latest version of QuickCam Software - v11.5.
Once done, please do a clean boot/install as explained in my Tips and Tricks.
Hope that helps!
If your issue is
not resolved, please do not assign a rating just yet. Please post back as
to what steps you took, results, etc, and I will try to assist you further as
best I can. I am here at your service.
P.S. -You can rate this solution with one of
four votes (remember that at times a bit of to and fro dialogue may be
necessary to resolve an issue).
Thank you for using FIXYA!
IrishDruid
SOURCE: Error code 0x000001fe
having had aread on various forums the only two things that seem to solve this in most cases is to make sure that you have windows media player 11 installed and that you have select the correct sound (mic) input for the recording.
831 views
Usually answered in minutes!
×