I would like to secure my internet connection. I have a Belkin wireless G Plus router. How to I achieve security?

When you added the WPS encryption ket to your wireless router, this secures your wireless network from unauthorized access to you wireless network.
To allow your wireless computers and wireless printer to communicate with your wireless network the wireless cards in the computers and printer needs to be configured with the WPA encryption settings that you configured in the wireless router.

Hi,

Welcome to Fixya. The security key can be found when you access the wireless settings page of the router. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.2.1, the Default password isblank.


Click on Security under Wireless and look for the Security Key or Network Key (Passphrase)


If you have questions please let me know. Thanks for using Fixya

you need to set the password in your computer's network connection as well:
control panel --> network connections --> wireless .
find your SID network and delete it.
then re-scan for network connections and when it finds it will ask for the password.
enter the password and you should be good to go

Your laptop must be a wireless computer. You want to secure the wireless network.
You will need to change the settings on the router.
First you will need to connect the computer to the router with the cable. Do you have any computer connected to the router ?
If not then connect the laptop to the router. Open the set up page of the router and change the wireless security settings of the network. Change the wireless network name also.
Click here for more information about the router and internet

u are typing in the wrong wireless password. acsess the router by using the IP: 192.168.2.1 in the internet explorer and click security in the left side of router's set up page.

You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here for step by step instructions

type in http://192.168.2.1 in start>run>
you will get the interface which say Router set up page
>click on security under wireless extream left
>if you have password enter click submit (if not) live password blank click submit
>select the security type
>creat the password
>apply changes
>cloce the belkin page
> and connect the wireless computer to the secured network

configure that wireless router type the default ip in the browser e.g.

http://192.168.1.1 and enter the default userid admin and passwrod admin and than enable the wep and disable the dhcp if you dosent require to connect more system to your wireless network. enable the wireless security and enter the ssid code in it. This will secure your wireless connection to get access from outsider's ok

You can directly connect your computer to the router thorugh the routers "internet" port and then re-run setup. OR you can type the IP address of the router into your address bar (the default is tipically 192.168.1.1 or 192.168.0.1) and then enter the router username and password (I believe the Belkin default is username:"Admin" password:"Password") in the admin control planel look for a "wireless security" tab. You can then define your wirelss security settings there. Just remember to configre the same settings on all devices that will connect to the router.

try www.supportspace.com

100% free, but 100% qualfied experts to help you.