- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
6 degrees Farenheit = -14.44 degrees Celcius
Water freezes at 32 degrees Farenheit or 0 degrees Celcius
Most food contains water, so what's the question?
On the Luxpro PSD111, Farenheit or Celcius are selected using the Jumper Switch J2 on the rear of the unit's circuit board:
Open = Celcius
Closed = Farenheit
sorry i dont know how to switch it for you but i do know how to convert c to f Degrees c times 1.8 plus 32 equals f temp Example 100c is boiling point so 100 times 1.8 equals 180 add 32 to that equals 212
zero degrees c is freezing point zero times 1.8 is 0 plus 32 is 32 200 times 1.8 is 360 plus 32 is 392 ect ect ect
Take your temp in Farenheit and subtract 32. Then take your answer and multiply by 9/5 or 1.8 and that gives you your answer. (farenheit -32) x 1.8 = Celcius
This sounds like a Jacuzzi. This is hard to describe. In the control box, on the circuit board, in the upper right corner there is a small bunch of pins in 2 rows 5 or 6 in length. one set of pins have a black jumper on them, remove the jumper and temp should go to farenheit. Turn off power to spa before doing this.
TEMPERATURE - CELSIUS OR FARENHEIT If you want to change the temperature indication from Celsius (C) to Farenheit (F), proceed as follows: Turn the main switch, off and turn it on again. Press the Enter button five times, then press the P2 button five times. These ten times must be completed within fifteen seconds. Within three seconds after pressing P2 the last time, use the < > buttons to select temperature indication.
×