Panasonic cq-c1323nw reset button

There are two battery supplies to your radio.

The main one via the Ignition Switch

The permanent one to feed + retain the memory...so this one is missing

Check the wiring, connectors + fuse

My friend have in car panasonic Cq-vx 100u them forgot the code. now Ineed a defaul code please sir.

Press TRACK button for 10 seconds...

Hello,

Yes, the Panasonic CQ-C1100U can be connected to a 2-channel amp. It has a single set of preamp outputs. I'm attaching an image of the connection shown in the Panasonic user manual. The appropriate connection is the one without the dashed line. The dashed line showing a 2nd set of outputs only applies to the 1110, 1120, and 1200 models.

Hope this helps. If it does, please rate as "FixYa". Thanks!

i have the same problem but on a model cq-c5400w i suspect may be security feature ? have checked with logic probe happens inside main micro.

If you receive an error reading or the cd ejects automatically briefly after being inserted, the headunit needs to be repaired or replaced

Yes the hook is the round port on the top right side of the back of the unit right above the main hook ins for power, ground, and speakers.

I don't have the wiring diagram for panasonic CQ-VD6503U car stereo with DVD and navigational system ready. Could you tell me where I can get one? Can you also tell me if this stereo is also navigation ready? I don't know if need a software cd and if I do could you tell me where I can get it too?

YOU SHOULD HAVE TWO LEADS IN THE CAR, ONE FOR POWER AND ONE FOR SPEAKERS, YOU WILL NEED A FORD TO ISO ADAPTOR LEAD AND THEN YOU WILL NEED THE LEAD WHICH CONNECTS TO THE PANASONIC RADIO

i just fixed mine had the same problem just hold the the right track button firmly until it resets it self and it worked for me hope it does for u