- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Transferring files by connecting the camera as a removable disk Connect the camera to your computer as a removable disk. 1 In Shooting or Playback mode, press [m]. 2 Select Settings - PC Software - Off. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable.
Transferring files with Intelli-studio Intelli-studio will start automatically when you connect the camera to your computer with the USB cable. The battery will charge while the camera is connected to a computer with the USB cable. 1 In Shooting or Playback mode, press [m]. 2 Select Settings - PC Software - On. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable. 5 Turn on the camera. • The computer recognizes the camera automatically and Intelli-studio launches automatically. 6 Select a destination folder on your computer, and then select Yes. • New files stored on the camera will automatically transfer to the selected folder. • If your camera has no new files, the pop-up window for saving new files will not appear.
If the Forced flash setting is already enabled and the flash is still not working, then the issue may be due to another camera setting. Even if the Forced flash setting is enabled, the flash will still not work in the following circumstances:
When shooting MPEG movies
When shooting in the Twilight or Handheld Twilight mode
If shooting with the Burst or Multi Burst mode
Shooting with Sweep Panorama
Shooting with the Fireworks or High Sensitivity mode.
generally an indication that something is wrong in the system setup. Press F2 and enter setup, check the time and date settings and the system event log (If BIOS has one) for incorrect settings, also check and see if the BIOS shows a hard drive installed.
If time and are wrong, set them to correct and save settings. If system keeps losing time and date after power is removed, then the backup battery may need to be replaced.
If HDD is not detected, then reseat it. If still not detected replace it.
Install the disc while the camera is not connected. After restarting your computer, turn the camera on and plug it into the USB port. The camera mode has to be set on playback ( the little triangle). If it is set on the little camera icon, the computer will not detect the camera. Then the computer detects the new hardware and you can choose the proper action.
That's because this is a quad. It compresses all 4 video feeds into 1 file. When you play it back, it decompresses the video and shows you each camera. Playback through this unit is the only way to see 1 camera at a time.
To be able to copy 1 camera shot to a DVD, this is what you need to do:
You need to have a TV with Video in and Video out jacks.
Connect the Quad to the TV Video in jack and connect the TV Video out jack to your DVD Video in jack. Playback a single camera shot on the quad to the TV and hit record on your DVD. - The DVD will record whatever is shown on the TV.
If you have camera software installed - take it out.
If the Camera/Card are functioning Windows Scanner/camera wizard should sort it.
If that fails take the card out and try to get the use of a card reader or another computer or processing station - you have to prove Camera/Card/Computer which is not doing the business