At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Fugifilm FINEPIX A205S
When I switch on the power the zoom lense comes out but the screen is blank and when I try to turn the power off nothing happens and the lense doesnot retract.
remove the batteries from the camera and leave it for one hour. then again put the batteries and thebn use it. tell what do you observe in that remove the batteries from the camera and leave it for one hour. then again put the batteries and thebn use it. tell what do you observe in that
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi, Zoom Error occurs when there the lenses are not able to move and something is obstructing the movement like some dust or sand grains etc., to dislodge the obstructing particles try tapping the lense side corner of the camera on a table top lightly (not too hard please, as the lense and autofocus combination is quite fragile) a couple of times in switch off mode and trying to power on after every 2-3 taps.
or you might send it out to a service centre, the charges are generally just the serviceing charges as no new parts needed.
All you can try is to remove the batteries, wait for about 5 minutes the replace them. If it's not working, it seems to be a problem either at the CCD/CMOS sensor, or at the lenses zoom mechanism.
It swounds like the system battery may need replacing.
This is separate from the usual batteries that you change and charge up. look on the base of the camera to find a round disk with a groove in it. Inside is a button battery CR2032 or similar. This is the battery that controls all the setting you have set for brightness contrast number continuity etc etc. replace this noting the way it came out + up or down and i think your problem may be solved for abot $4.00
If the camera was on when it was dropped you probably jamed the lense coil. The lense coil is what helps the camera smoothly pull in the lense and back out. Now, just to specify, what exactly are you having a problem with? Will the actual lense not go back into the camera when you turn it off; or can you not get your camera off zoom?
Let me know~
Olivia
Is the battery fully charged? Or is the battery near the end of its useful life? Some batteries hold a charge better than others-- I have 2, both used well, and one seems to last longer than the other...
If the "!ZOOM ERROR" message is displayed on the digital camera, switch the camera off and on again 2 or 3 times. If this does not clear the error, take the camera to your nearest FUJIFILM Service Station for testing and repairs. Problem may caused by lens zooming gears stuck.
Try turning the power on and gently pulling the lens outward as it powers up. This may force the gears to re-align themselves. Use "fingertip" pressure only. Don't force it excessively. Also try turning on, and then applying slight pressure to the front of the lens while you power it off. You can also try rotating the lens barrel segments while it powers up or shuts off. Sometimes either can get the lens back on track.
hi
this error indicates that the delicate mechanism of the zoom had gone bad
there is no way you can fix this by yourself
leave it for an expert
have a good 1
I dont understand t/it got Jammed
×