# There was a scientist who after doing research, found that color of skin of animals vary with change in distance.One day he started to chase a beer. He walked 1 mile towards north, then turned and walked 1 mile towards east and then caught the beer and radio-ribboned the beer Then he left the beer at that spot and returned to his base-station taking a turn towards south (walked 1 mile towards south). Then what was the color of beer at that spot? a) white b) brown c) black d) grey

Posted by on

• Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

• Contributor

There was a scientist who after doing research, found that color of skin of animals vary with change in distance. One day he started to chase a beer. He walked 1 mile towards north, then turned and walked 1 mile towards east and then caught the beer and radio-rib boned the beer Then he left the beer at that spot and returned to his base-station taking a turn towards south (walked 1 mile towards south). Then what was the color of beer at that spot?

Posted on Mar 27, 2011

×

my-video-file.mp4

×

## Related Questions:

### 1973 Challenger starts fine cold , will not start after hwarmed up

First off , lucky guy owning an original muscle Mopar . Does it have power to the positive side of the coil and a switching ground to the negative side of the coil .

Jul 09, 2018 | Cars & Trucks

Tip

### How to properly pour a Guinness

As a former bartender I have literally spent hours contemplating (and arguing with patrons!) about the proper way to pour a Guinness. Since leaving my post behind the bar, I did a little research in that matter. And to my chagrin, I was pouring the delicious stout almost correctly!

According to Guinness's website, it should take you a full 119 seconds to pour a pint. That's almost two whole minutes!

You want to start by using a glass made by Guinness or a standard tulip shaped pint/half liter glass.

Place the glass under the tap at a 45 degree angle.

You do not need to let the tap run for a second before placing the glass beneath it (unless it is the first pour of the day in which case you need to clear out the tap for about 20 seconds.)

Since a double pour is required for the perfect pint, you want to stop when the glass is about 3/4 full. Place it on the bar so that the nitrogen gas has time to settle.

Once the beer becomes a solid, rich brown color you are ready for the second pour.

Place the glass directly under the tap. If the tap has a backwards lever, use this. The back lever will let the beer pour more slowly and you will have time to draw a clover or a heart in the foam. This is a great way to impress your customers. If you do not have a backwards lever option on your tap, simply pull the lever forward and fill the beer up. This does not need to be done at an angle.

Here is a video demonstrating the way to pour the perfect pint of Guinness:

on Oct 27, 2013 | Wine & Spirits

### What. Bait to attract and kill mosquitos

to start with there is only one mosquito that bites and that is the female
and she bites to get protein for the eggs that she carries
so nay warm blooded animal is fair game
so the bait will have to smell like a warm blooded animal and scientists have not got that right yet

Nov 18, 2017 | Camping, Backpacking & Hiking

### How do some scorpions glow when light shines on it?

Do scorpions glow? Yes. That's an easy question to answer. It's a bit more difficult to pin down what exactly causes them to glow. In fact, scientists are still working on finding a firm answer to that question.

What scientists do know is that something in the scorpions' exoskeletons cause them to glow. Scorpions, along with other arthropods and insects, have an outer layer called a "cuticle." Unlike the cuticles on your fingers, which are made of hard or dead skin, the cuticle on a scorpion is a part of its exoskeleton. This cuticle has a thin section called the "hyaline layer." The hyaline layer is what reacts to ultraviolet (UV) light, such as black light or moonlight, and causes the scorpion's body to glow.

The hyaline layer is really strong and truly stands up to the tests of time. In fact, scientists have found that even fossilized scorpions glow under UV light. Additionally, when scientists preserve scorpion specimens in liquid-filled jars, the hyaline layer can make the liquid glow! Crazy, right?

While observing scorpions, scientists have noticed that the creatures don't glow immediately after molting. Rather, the cuticles have to harden completely before they shine blue-green in the starlight. But scientists still don't know if the glowing material comes from a chemical reaction in the hardening process, or if the scorpions actually secrete the glowing substance.

May 14, 2017 | Cars & Trucks

### How often should I feed my fish?

I did a lot of research about this when I first got an aquarium. Some people will tell you that you can feed them once/twice a day and it will be enough. Through some extensive research I found that it is a good idea to mimic their natural feeding habitat and feed them very small amounts several times throughout the day. Of course, it is crucial that you do not over feed your fish.

Aug 29, 2012 | ANIMATE Fish

#### Related Topics:

387 people viewed this question

Level 3 Expert

Level 3 Expert