Question about Motorola Mobility DRC800 Universal Remote Control
I can't find the code for my motorola drc800 4 in 1 remote control, to work with my soyo prive 26'' tv i just bought. Please help me.
How do i program motorola universal remote to an apex tv.
Posted on Aug 09, 2009
Hi try this.
If none of the codes listed under
“Device Codes”on the back of this
guide match your device, you can
search for a set of commands that will
work. Your remote will sample all the
codes in its system for that device
mode to find one that will allow you to
control your device.
1. Press and hold a device mode
key (AUDIO, DVD/VCR, or TV) for
at least six seconds. The LED for
each device key lights up, then
the key for the device you
selected remains on.
2. Press a function key (such as
Power or Mute). The following
function keys are valid for
Searching (Power is
• CH +
The device key’s LED blinks
three times, then turns off.
3. Press !. The remote will send
the IR command for the function
you pressed in Step 2.
4. If the device performed the
function you pressed, press OK.
The remote will now control the
device you selected in Step 1.
If the device did not perform the
function you pressed, repeat step
3. Press " to retry the previous code
and go here to have the complete user manual.
I hope this helps
Please rate accordingly
Posted on May 04, 2008
You can find the remote control codes for difrent brands of
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps! Should you have any further questions, please feel free to post them here.
P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.
Thank you for using FIXYA!
Posted on May 02, 2008
Tips for a great answer:
Jan 15, 2014 | Soyo SYTPT3227AB 32 in. LCD TV
Oct 03, 2010 | Soyo Atlas DYLT3212 32 in. HD-Ready LCD...
i have a 32inch prive remote that dose not work how can i get one or find a code or the replacement remote
Sep 20, 2010 | Soyo Atlas DYLT3212 32 in. HD-Ready LCD...
Nov 05, 2009 | Televison & Video
Oct 27, 2009 | Soyo DYLT032D 32 in. LCD Television
Jul 17, 2009 | Soyo Atlas DYLT3212 32 in. HD-Ready LCD...
Mar 24, 2008 | Directed 434MHZ Remote Control
2,311 people viewed this question
Usually answered in minutes!