Sony dvd player will not eject disc: "Disk Error" displays on screen then it will try to load over and over. It will not respond to open?

Hold down the play button, it will take a bit but it turns of the child lock

The disc tray does not eject when the OPEN/CLOSE button is pressed. Solution
Follow the steps below to troubleshoot this issue.

IMPORTANT: The disc tray will not open while a disc is loading; this is normal operation. If this is the case, wait until the disc is finished loading before pressing the OPEN/CLOSE button to open the disc tray.

1. Make sure the disc tray is not locked; if necessary,
2. Perform a power reset.
   1. Press and hold the POWER button for 10 seconds until the BD player turns off.
   2. After the BD player turns off, press the POWER button again to turn it back on.
3. Attempt to open the disc tray by pressing the OPEN/CLOSE button on the front of the BD player.
4. If the disc tray still does not open and a disc is stuck inside, follow the steps below to force the disc tray to eject:
   1. Turn off the BD player.
   2. Turn the BD player back on.
   3. Immediately after POWER ON is displayed, press the STOP button on the front of the player. IMPORTANT: Only use the STOP button on the front of the BD player. The remote control cannot be used for this operation.
      NOTES:
      
      • The disc tray should eject and the BD player will turn off. If it does not eject, repeat steps A-C.
      • It may be necessary to press the STOP button in step C two or three times.

If the issue is still unresolved, service may be required

Check the regional code of the DVD you want to play. It is at the back of the DVD cover. It should be compatible with the regional code which your DVD player can play. If they are not tallying the disc will not be read

It is very possible that the lens motor has burnt out. Sometimes the capacitors on the motherborard short out causing the gear timing to go out..

The only thing you can do to fix this is to take the cover off. Get cotton swab and dip it rubbing alcohol and clean the glass laser eye with it.

Try cleaning both the disk and the lens of the dvd player. Sometimes even a little bit of dust can make your dvd player go ballistic. Brands like Sony,Philips and LG are very sensitive. If anything else fails, you can take it to a repair shop to find out if the lens isn't cracked or the LED isn't responding while trying to read the disk.

DVD players are ****!! This is my 5th time buying one. It's like the industry is running a big scam because that know that soon all movies will be digital mp3. All of my players give me the same error!!

uplug then replug then press eject

1. Ensure the child lock feature is disabled.
IMPORTANT: If necessary, consult the instruction manual for specific steps about how to disable the child lock feature.

2. Attempt to open the disc tray.
3. If the issue is not resolved, turn off the DVD player.
4. Unplug the power cord from the electrical outlet for 30 seconds.
5. Plug the power cord back into the electrical outlet.
6. Attempt to open the disc tray.
7. If the disc tray still does not open, simultaneously press the POWER+STOP+EJECT buttons; this will sometimes cause the disc tray to open.

If the issue is still unresolved, service may be required. The Sony® eService Web site at http://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer.

see this
Sergio

check the lens

remove the cover and see if the dvd run, if not you got a motor problem or a motor drive one,if yes then try cleaning the reading eyes(pickup)by blowing dry air (get a can at radio shack)check for goods, if dosent work, take it to a shop for a repair thats all you can do, is a job for a tech....good luck