I have a sharp lc19sh7 television and I would like to know how can I change the option to see all the chanels in original version, I'm in Spain and I can just watch the chanels in spanish. In the manual I read u can select the language u want to listen the audio but it is not what I want, moreover I change the audio to english but nothing happens. thanks.

If both your front panel and remote control are disabled, the best option would be to perform a factory reset to restore the TV to its original settings.
To reset the Sharp LC-40LE830U to factory settings:

1. Unplug the TV from the power outlet and wait for at least 60 seconds.
2. Press and hold the power button on the TV for 5 seconds while the TV is still unplugged.
3. Plug the TV back in and turn it on using the power button on the TV itself.
4. Once the TV is turned on, press and hold the "input" and "volume down" buttons on the TV simultaneously for 5 seconds.
5. The TV will then enter the service mode menu.
6. Press the "menu" button on the remote control to navigate through the menu and select "option."
7. Select "factory reset" from the options menu and follow the on-screen instructions to complete the reset.

Note: The factory reset will erase all custom settings, including parental controls, picture, and audio settings.

Do a reset to this set, and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset; and the other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Try 124 code, might work for combo unit.

Only with the original remote.

You would be better to get another original remote---Universal remotes if they will program will be missing a lot essential functions the original had.

GOOGLE THE MODEL NUMBER AND LOCATE AN ORIGINAL.

Are you running it in Demo mode in menu
hope this helps

Try going to the SET UP option on your tv's MENU.
Look for the CHANNEL SET UP option.
Make sure the CABLE option is turned ON.
Let me know if that works.

Good luck.

It depends on the TV a bit. Which model of Broksonic TV do you have? Do you have the original remote? (remotes.com has replacement remotes for many TVs.) Look at the TV (or the original remote) for a menu or channel add subtract option. (The TV is probably programmed to skip the channels that didn't have a signal in the past so you need to reprogram this.) If the TV is a really simple TV (with just the channel and volume controls on the TV), you'll need the original or a direct substitute remote (or a higher end programmable remote). Most basic universal remotes will control power, channel and volume but not the reprogram channels option (in my experience). If you can program the add/remove channels, press 60 on the remote, wait for the TV to go to that channel and then press the Add Channel button. Alternately, with the satellite receiver on, press the combination to search all channels and program the skip to channels with signal.

I hope this helps.

Cindy Wells
(I had a really old Emerson TV; when the original remote started to fail, the cheap universal remote didn't handle the channel programming. Fortunately, the original remote would usually still work for that.)

Get the original Sony remote. Select TV or the Video input you want to use. Then press the Display button to make the text dissapear.

Jerry G.

You will prob. have to order a new original remote.  It has the options on it to change from analog to digital.  I don't believe there are any options in the menu or buttons on the tv that switch between the two.