Question about OKI C5800dn Laser Printer

1 Answer

Oki c5800 printer with a sensor malfunction, where do I find this sensor? How do I eliminate this problem? Toner sensor error

Posted by andrewsj991 on

Ad

1 Answer

Whit

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • OKI Contributor
  • 185 Answers

The toner sensor (43131601) is located on the right side of the sub-chassis that holds the Drum/ Image units. It may be defective.

Whit
Item, Inc.

Posted on Aug 17, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 980 on OKI C5900 fatal error


First, there is no model C5900. There is a model C5800. On the assumption that you are having this issue with a C5800 then the problem is media wrapped around the fuser. After cooling you can try to unravel or unwind the wrapped media but you may need to replace the fuser.

Jan 20, 2014 | Oki Electric Industry C5900N Led Printer

1 Answer

Fatal error 983


This error is an "Incompatible toner" error for using non-original Oki toner. The problem is the chip sensor cannot read the chip on the toner. So either the sensor is not working or the toner is defective.
Regards Abhilash How do u rate the service?

Sep 20, 2010 | OKI 9800hdn Laser Printer

1 Answer

My Oki C5800 says "Replace Belt, 355: Belt Life" but I was told I could reset it without changing it if it was still good. How?


requires a fuse that sits underneath the transfer belt. However the belt itself would be full of waste toner that would need to be emptied

Jun 30, 2010 | OKI C5800Ldn Led Printer

1 Answer

Fatal error 231 on oki c5800 after changing toner, tried power off/on still doesn't work


From the service manual, doesn't look good.
A technicain will have to look at the printer.

RFID Reader I/F Error
An interface error was detected with the RFID reader device.
01 : communication error between the RFID reader and the engine PCB.
02 : the transceiver circuit error of the RFID reader.
03 : communication error between the RFID reader and the Tag chip.
04 : the RFID Tag detection error (more than 4 chips).
If rebooting the machine does not improve the symptom, you need to
check the device.

Mar 08, 2010 | OKI C5800Ldn Led Printer

1 Answer

540 : y toner sensor error


Hi moneybaggz52:
Here is your problem.
Symptom:
When setting up a brand new C5100n or C5300n out of box, a toner sensor error is encountered.

The printer can display any one of the following errors:

543K: TONER SENSOR ERROR

540Y: TONER SENSOR ERROR

541M: TONER SENSOR ERROR

542C: TONER SENSOR ERROR
Cause:
This generally can be caused by two things.

1. The toner cartridge lock lever is not in the correct position.

2. The Transfer Belt lock levers are not in the correct position.
Resolution:

Check the appropriate toner cartridge lock lever (Shown below) and make sure that it is in the correct position.
0.110?openelement&fieldelemformat=gif 2.1ac?openelement&fieldelemformat=gif
CORRECT POSTITION INCORRECT POSITION


Check both transfer belt lock levers (Shown below) to ensure that they are in the correct position.
5.2eea?openelement&fieldelemformat=gif
CORRECT POSITION

10.4086?openelement&fieldelemformat=gif
INCORRECT POSITION
Hopes this helps


May 24, 2009 | OKI C5500n Laser Printer

1 Answer

OKI C5800 SHOWS: ORDER K TONER, IT CANT PRINT BLACK WORDS.


If you have replaced the K cartridge, and it still gives you this message, it is due to the sensor bieng blocked or bad. Take out your K cartridge, clean out any loose toner. Do not blow it back into the unit. Use a cotton pad or cloth to clean it out. Then you have to clen the sensor itself. it is recessed on the right wall of the unit ,across where the K cartridge sits. Here is where you have to purchase a can of compressed air and shoot it into the opening with the plastic straw that comes with the can air.. (Again, do not blow air all over the inside of the unit!!) Just shoot it in the opening  to clean the sensor LED. This is a common problem caused by toner spills.
If I could be of further assistance let me know, Otherwise please rate this solution. Thanks,Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Apr 24, 2009 | OKI C5800Ldn Led Printer

1 Answer

Toner sensor error on an Oki C3520 Laser


Check the little switch/door on the right hand side of the drums.
This has worked successfully for me.

Symptom:
After replacement of a C3530 Image Drum, the message, "Toner Sensor Error" is displayed.

0.10a?openelement&fieldelemformat=gif




Cause:
The plastic shutter in the ID is fully or partially covering the toner sensor window.




Resolution:
Move the cover upward to allow for the sensor to become fully exposed prior to reinstalling the drum.

0.106?openelement&fieldelemformat=gif











moz-screenshot-2.jpg

Oct 18, 2008 | OKI Electric Industry C3520 Laser Printer

1 Answer

Have an OKI Printing Solution C5800 color printer received the following error message: Check Toner cartridge 543K Toner Sensor error - have already changed the Drum and the toner. The error will not go...


Found this at Fixyourownprinter.com

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

All toner, drum, fuser and transfer figures return to 100%.

Worked for me when I had the same error. Hope it helps.

Aug 08, 2008 | OKI Office Equipment & Supplies

Not finding what you are looking for?
OKI C5800dn Laser Printer Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Alvin Barnabas
Alvin Barnabas

Level 2 Expert

134 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Mike

Level 3 Expert

4369 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...