I have a workcentre pro 575 and am receiving the message, "memory full". Nothing will print, and I hope you can tell me how to get the stored memory to print out. Thanks.

You can find your answer at the link below. Just type "memory full" in the search dialog box and it will provide you with the many results and solutions for clearing the error. The message can be the result of many issues, so you may need to perform a few different steps:

http://www.support.xerox.com/support/workcentre-pro-575/support/enus.html

Yes, set your fax to 6 or 7 rings or manual.

Plug the phone jack cord to LINE
Plug the telephone to TEL

This problem might be the moden board, or main board, or both.

This message usually shows up when you've received many faxes and haven't printed them, or when you have attempted to send faxes but they never made it and were kept in memory for a later date.
I would search in your user's manual how to clear the memory, since each manufacturer has a different way to do this, and the machine's menuing systems also differ from one manufacturer to another.
Good luck!

Is the phone line plugged into the "line" jack and not the " phone or Ext " Jack?

Check your fax speed settings, also, make sure you get a good clear dial tone on the line. Sometimes it wont send if it detects line noise.

Could be the tab that actuates the top cover switch is broken off.

The process unit is your drum,toner, and developer unit. It sits right under the top cover. Big black removeable cartridge.

Do you have a DSL or any other type of Digital phone line?

Yes, after refilling the cartridge, fax in memory automatically print out with charms. :) thanks for your help.

error #22