My Panasonic PT50LC13 will no longer turn on. If you press the power button you get 2 long green blinks and then faster green blinks which go on indefinately; then if you press the button the light switches to a red light blinking at the same speed and it will blink like this indefinately.

Question 1

0helpful

1answer

When TV is turned on the green light comes on but the TV does not. 2 seconds later the green light turns back off.

DO THE SELF CHECK THIS SET HAS AND LET ME KNOW WHAT YOU FIND:

When you turn on and green light comes on and then goes off:

On the front of the set press and hold both the Menu and Input buttons at the same time for longer than 5 seconds and release both buttons.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know and if this told you something you did not know rate this solution as very helpful as I do this here for free.

SD TECH

Aug 31, 2010 • Mitsubishi WS-65311 65" Rear Projection...

2helpful

1answer

Have PT50LC13 that will not light up when power button is turned on. The power button just blinks orange 5 times consecutively with a 2 second delay between intervals.

Hi,

The light flashes 5 times consecutively with a 2 second delay becuase it denotes there is some internal problem in the TV.So please consult your near by service centre.They will come and fix the problem.You cannot do anything .

Thanx

Jul 23, 2010 • Panasonic Viera TH-42PZ80U Plasma TV

1helpful

2answers

Having problem with my Panasonic TV.

hello Plug the power cord back into a properly grounded wall outlet. Then press the POWER button on the projection display or the
remote control to turn the power on
While pressing the VOL- button on the projection display,
hold down the PIP or SPLIT button on the remote control
simultaneously for more than 5 seconds
When the lamp time reset procedure is complete, the
above screen will appear. (This screen may be different from
the actual screen
Note: When the lamp time reset is complete, the LAMP
indicator goes out.

regards
shaun

Jan 18, 2010 • Panasonic PT-50LC13 50" Rear Projection...

0helpful

1answer

Panason PT-50LC13 TV won't come on, light blinks green then red

Ballast failure is more that likley the problem. Is the lamp light blinking,...once every 5 seconds? Discontinued part and can only be purchased used or rebuilt. Rebuilt units are available, check Ebay. Have a service type person confirm problem before throwing good money after bad!

Jan 03, 2010 • Panasonic PT-50LC13 50" Rear Projection...

1helpful

1answer

I have a Panasonic PT50LC13 Television. For about the last month when you tried to turn it on, it would come on then quickly turn back off and you could hear the fan running then the red light would blink....

For that model, there is a ballast kit that would need to be installed. A diode and 2 caps need to be replace on the ballast. Check the lamp as well.

Dec 16, 2009 • Televison & Video

1helpful

1answer

Keeps blinking. I've shut it off, and cancelled all print jobs - even unplugged it. Keeps blinking. Says there is an operator error

Try this:

1. Turn off printer (use button, don't unplug)
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.

If this not help may the print head is defective.

Oct 07, 2009 • Canon BubbleJet i560 InkJet Printer

2helpful

1answer

Tv won't turn on

You may need to replace the lamp, and if this is the case make sure you pbtain information to reset the lamp use hours so that the tv will recognise that their is a new lamp in the unit, Good Luck.

Sep 24, 2009 • Panasonic PT-50LC13 50" Rear Projection...

3helpful

2answers

My panasonic (pt50lc13) keeps shutting off after a few minutes.

probably lamp gone out. You can change it youself if you still have owners manual should have directions, if not most lamps have instructions in box.

Aug 10, 2009 • Panasonic PT-50LC13 50" Rear Projection...

1helpful

1answer

The tv wont turn on

hello 2 blinks on this tv means you have this issue below
PT-44LCX65
2 blinks 5 secs you have your lamp cover open

check for this

hope this helps

Dec 14, 2008 • Panasonic PT-44LCX65 Television

1helpful

1answer

Canon i560 Ink jet Error Code 5C00

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

May 05, 2008 • Canon BubbleJet i550 InkJet Printer

Question 2

Anonymous

Master 10,594 Answers
Posted on Aug 17, 2010

Anonymous

Master

Joined: May 26, 2008

Answers

10594

Questions

9

Helped

2957363

Points

33084

How old is this tv?<br />Did you replaced its lamp in last 2-3 years?<br />I think your tv needs lamp replacement.<br /><br />

michael_r274 Aug 17, 2010

After looking at it closer it does need a lamp. The lead on the bulb is broken in two. The only problem is that I've read where this tv needs a ballast repair kit from Panasonic to keep it from blowing the bulb in the future.
Anonymous Aug 17, 2010

Yes, Part Store.com offers ballast repair kit for $26
Click above link to have details.

×

Related Topics:

Trustworthy Expert Solutions

My Panasonic PT50LC13 will no longer turn on. If you press the power button you get 2 long green blinks and then faster green blinks which go on indefinately; then if you press the button the light switches to a red light blinking at the same speed and it will blink like this indefinately.

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

When TV is turned on the green light comes on but the TV does not. 2 seconds later the green light turns back off.

Have PT50LC13 that will not light up when power button is turned on. The power button just blinks orange 5 times consecutively with a 2 second delay between intervals.

Having problem with my Panasonic TV.

Panason PT-50LC13 TV won't come on, light blinks green then red

I have a Panasonic PT50LC13 Television. For about the last month when you tried to turn it on, it would come on then quickly turn back off and you could hear the fan running then the red light would blink....

Keeps blinking. I've shut it off, and cancelled all print jobs - even unplugged it. Keeps blinking. Says there is an operator error

Tv won't turn on

My panasonic (pt50lc13) keeps shutting off after a few minutes.

The tv wont turn on

Canon i560 Ink jet Error Code 5C00

Not finding what you are looking for?

PT-50LC13 50" Rear Projection HDTV

When TV is turned on the green light comes on but the TV does not. 2 seconds later the green light turns back off.

Ask a Question

Check Out the Latest HD Televisions Report

Top Panasonic Televison & Video Experts

Grubhead

Grand Canyon Tech

Cindy Wells

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

. PT-50LC13 50" Rear Projection HDTV...

Related Topics:

Trustworthy Expert Solutions

My Panasonic PT50LC13 will no longer turn on. If you press the power button you get 2 long green blinks and then faster green blinks which go on indefinately; then if you press the button the light switches to a red light blinking at the same speed and it will blink like this indefinately.

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

When TV is turned on the green light comes on but the TV does not. 2 seconds later the green light turns back off.

Have PT50LC13 that will not light up when power button is turned on. The power button just blinks orange 5 times consecutively with a 2 second delay between intervals.

Having problem with my Panasonic TV.

Panason PT-50LC13 TV won't come on, light blinks green then red

I have a Panasonic PT50LC13 Television. For about the last month when you tried to turn it on, it would come on then quickly turn back off and you could hear the fan running then the red light would blink....

Keeps blinking. I've shut it off, and cancelled all print jobs - even unplugged it. Keeps blinking. Says there is an operator error

Tv won't turn on

My panasonic (pt50lc13) keeps shutting off after a few minutes.

The tv wont turn on

Canon i560 Ink jet Error Code 5C00

Not finding what you are looking for?

PT-50LC13 50" Rear Projection HDTV

When TV is turned on the green light comes on but the TV does not. 2 seconds later the green light turns back off.

Related Topics

Ask a Question

Popular Questions

Philips universal remote codes

Plasma TV-power light does not come on

What is the screw hole size in back of tv

Red light flashes 10 times - Panasonic TH-42PX6U

Panasonic tv will not turn on red light flashing 3 times what does it mean

Check Out the Latest HD Televisions Report

Top Panasonic Televison & Video Experts

Grubhead

Grand Canyon Tech

Cindy Wells

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

. PT-50LC13 50" Rear Projection HDTV...