Hi, I have a HP Photosmart C6300 All-in-One series printer.I do not have the instalation CD and I want to add another compouter to use with the printer.How do I down load the required software.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=3560272&prodTypeId=18972&objectID=c02283786

Follow the above link. This is exactally how to setup the printer for wireless use.

Hi,

You can install driver from HP website.

Since you don't have the setup disc for this printer , you need to download the printer software from this link to install it.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3730516&lang=en&cc=us&taskId=135&prodSeriesId=3560272&prodTypeId=18972

Do you have the printer on the main computer set for "sharing"?

hi thanks for using fixya!

May I ask, what is your operating system? Is it XP or Vista or MAC? Just for clarification.

but in XP you may follow this steps:

First, please install the CD software for your photosmart printer 1000. After the successfull installation, you should go to the Start Menu > Printers and Faxes, and there you must see your own printer, if not just select the Add Printer and just follow the next instructions.

For printer driver you may download in here http://download.cnet.com/HP-PhotoSmart-P1000-Series/3000-2116_4-120769.html

Hope it helped you, good luck! if you need further assistance, let me know.

Please don't forget to rate my solution positively! thanks!

Your HP model link :

http://h10025.www1.hp.com/ewfrf/wc/product?product=57595&lc=en&cc=us&dlc=en〈=en&cc=us

Welcome to Fixya !

You can search and download the drivers and firmware software required to use your HP priter from this site - > http://welcome.hp.com/country/us/en/support.html

Just enter the exact model no and the operation system you are using to get the download options

Rate the solution as Fixya if its solves your problem .

Had the same problem on my Dell Latitude running WinXP SP2, installing a HP6380.

I noticed the installer was trying to access the other network printers I had setup (the status of these printers turned into "unable to connect" in Control Panel.) These printers are on the company's network and were not accessible from the home network I was on at the moment of installation.

I then started a VPN connection to the company's network, so that the printers were all accessible. The "add device" part of the insallation then went through and the printer was setup successfully.

Emiel Odijk

hi,
please follow the link for solving your problem

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01461452&cc=us&lc=en&dlc=en&product=3730843

hi sir
go to control panel>
printer& fax>
double click on the add printer>
select the type> and follow the step> by inserting the printer software> it work's thank u.