Help kp-57ws500

No,U have solderwicks?U can buy it,in any Radio Shack store.Use solder iron on top of the solderwicks to soap up the solders out ICS pins.Replaced the ICS use any kind solders just resoders ICS back to the heatsink.Tries Websites Tv repair World.com,Tv repairkits.com to buy a complete convergence kit.

There is no projection lamp in this TV. It is a 3 picture tube style rear projection.

Green and Red guns seems defective and requires replacement.
Both guns (CRTs) are no longer available so TV has no worth to repair.

Green CRT (tube) has following part number and description...

8-733-652-15 CRT 07MVC21(G)-L(FL)

Green Tube for KP-57WS500 is no more available and this can only be taken from any damaged / broken TV of same model.

It is problem of failure of convergence ICs or related circuit. Please confirm model number of your TV that is Sony KP-57WS500 to help you out.
It would be nice if you could past TV snap shot here for easy understanding.
Thank you.

You can buy replacement here:
Appliance parts, electronics parts & more from PartStore.com
Buy also the service manual, you find it on same website , the manual has diagrams that you must follow to test and replace the faulty part.

6 blinks means lamp thermal fuse blowing, replace thermal fuse.

See here

you need a new green CRT, sony has had some problems with the green and blue crts developing shorts . Let me know if you need further assistance.

Probable convergence IC failure = replace both for reliability..T.

Sounds like a conergence circuit failure, probably a couple of AMPs and a few discreet components. Probably 250-300 repair