I have a GE spectra xl44 stove model #jgbp28bea2ct, when I turn on the oven the clean light winks and the oven does not heat up. please help

Hi,

Here is a tip that I wrote that will help you with the Xl44 profile error codes.

Oven Fault Codes for GE XL44 Oven

heatman101

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101



czvb

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101 ..

Change the Temp sencor for the self cleaning

If you need further help, reach me via phone at https://www.6ya.com/expert/scott_541ceb86d69e7743

gas valve regulator or clogged line

the gasket or seal is likely gone ...replace

oven takes long time to cook food

I have the Ge Xl44 stove the burners and broiler work fine but the over will not heat up. How can I resolve this problem?

I have a GE Gas Stove XL44 the stove top buners don't light by themselves without manual lighting. When I turn on the buner knob the buner doesn't click. Also I used my self- cleaning oven for the first time and stopped it before the time was up after that is when the stove top buners wouldn't light by theirselves.

Most likely the oven ignitor is bad or weak.  You can look at it and see how it compares to the broil ignitor.  If you see a whitish color on the ignitor and if it doesn't fully glow then it needs to be replaced.