Televison & Video Logo
Posted on Aug 15, 2010

What's the reason to cause the TV shows up only sounds but not pictures?

1 Answer

Bob Pi

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 4 Answers
  • Posted on Sep 05, 2010
Bob Pi
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 05, 2010
Answers
4
Questions
0
Helped
770
Points
5

I may have a work around for you. I also have this model and the same problem. after trying many many sequences of turning on and off with setting changes I came across something that works for me 100% of the time. Turn off the tv. Place your left and right hand on the top corners of the tv. flex gently back and forth. turn tv on. this works for me. I can only say that this tv has some quality control issue(s). it will be my last Sharp product. this was a lowest bidder produced by a company other than Sharp with a Sharp label on it. good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My ecco 32 has sound bt no pictures its white

There could be several reasons for this issue, and it would be helpful to know more about the specific model of your TV and any troubleshooting steps you have already tried.
Here are a few possible causes of the issue you are experiencing:
  • A faulty HDMI cable or port: If you are using an HDMI cable to connect your TV to another device (such as a cable box or streaming device), try using a different HDMI cable or port to see if that resolves the problem.
  • A problem with the TV's display: If the TV's display is damaged or not functioning properly, it could cause the picture to not show up. This could be due to a hardware issue and may require professional repair.
  • An issue with the TV's settings: It's possible that the TV's picture settings may be set to a mode that is causing the picture not to display. Try going into the TV's settings and checking the picture mode to see if that resolves the issue.
1helpful
1answer

My toshiba 20as22 tv suddenly made a loud arcing sound and lost video and audio. when i unplugged and plugged it in again, it still made the arcing sound, what could be causing this ???

Your TV has developed a bad flyback transformer. You also will have a bad horizontal transistor. A bad picture tube can contribute to a stressed transformer and transistor. Another reason this TV is on the fritz, you have bad capacitors. Sometimes a bad capacitor will take down the most important ICs in a TV. I would not recommend a repair, as it will be to costly. Thanks for asking and show all hands of support.
0helpful
1answer

Last night our TV made a loud popping noise then the picture went out. We still have sound but have trouble turning the TV off. What could this be and is it fixable? Thanks, Anne Marie Orcutt

Hi,
Question shows it is Vizio L32 lcd tv and symptom shows back light inverter board for defective for some reason and loud noise would be popping of any chip on inverter board.
Shopjimmy..com has replacement boards of that model on reasonable price and local tv repairman will replace defective board after checking/ testing the tv.
Hope these info will help.
Thanks.
0helpful
1answer

Lg 3000 42in tv, no picture just blank screen but sound is working

Sounds like a problem with your backlights. Could be the inverter, the CCFL's, the power supply board, or even the main board causing it.
But don't fret, this could be a very good opportunity for family bonding. I like to stand up in front of the TV and act like what should be showing on the screen for my family's viewing pleasure.
Ok, I used to do that anyway. But my family left me for some reason.
0helpful
1answer

No picture but sound on panasonic plasma

Unplug the TV and disconnect any HDMI cables to the set. If the issue goes away there is a possibility that your HDMI source is causing the problem. Anything on the HDMI can cause odd problems with the TV since the serial data and serail clock lines are routed on HDMI. Those are the 2 commmunication lines used throught the TV for operation so anything HDMI that might load down one of those can cause issues.
0helpful
1answer

Hitachi tv

Your question is very vague. The reason is that there are many components in a TV set that can cause no sound or picture.

The main thing that is in common is the main power supply. In your set, a failure of the horizontal scan amplifier will also cause no picture or sound, because its secondary side supplies power for most of the TV's operation.

Jerry G.
0helpful
1answer

Tv picture

Hi

Most likely reason, Picture tube.

Capital98
0helpful
2answers

Tv shows cloudy picture

What you said sounds like a focus problem. A focus proble is usually caused by a problem in the HV setion of the TV either in the IHVT or the HV transformer itself.
Not finding what you are looking for?

95 views

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...