I need spare parts of LCD display - EliteGroup ECS G900 Notebook

The LCD display contains both the display and backlight. They are integrated as one piece. Therefore the entire display needs to be replaced. The backlight connections are soldered to the LCD connections. Replace the entire display.

The flexible cable to the LCD is to be checked for defects like breakage. Or the LCD is defective and both are a common problem.
If you need any spare parts mail me.

sivaram v
videolabs

Look on the lcd display and type the part number into your favourite search engine.

I don't think that you can do it.Even if you can open the case inside there are many sensitive parts which can easily damage.And at the same time you need spares-parts to replace which will be bought from stores.If you buy the lcd and the problem is the Display ic, LCD is no needed for you.So, my advise is to visit nearest mobile repairing shop before it damage further.Thanks for visiting fixya

For a broken or cracked lcd screen, they have the original displays at www.camerasandparts.com They are the place for something like this since you're actually getting the Genuine Canon Part which is advantageous on these Powershots. Best of luck, hopefully they have your model on their site.

Check your computer by connecting a spare monitor, if okay! The acer monitor has a bad LCD screen and is not cost effective to repair. If on the other hand the spare monitor shows the same problem, the Video Graphics Card is the issue in the computer.

hi, if still looking for LCD Display replacement for your digital camera, pls don't hesitate to contact us, we are a big supplier for digital camera/camcorder spare parts in China http://szaideal.diytrade.com/

I just fixed my broken LCD display!

On Ebay I ordered a spare LCD part for the TZ7 at yimaoshuma9898 It toke 1 week from ordering to delivery. It cost 60 $ but its much more cheaper than repairing at an official panasonic repair centre for about 200 $.

Repairing was quite easy The most difficult part is to change the contact from display to main part of the camera. But afterwards it seems easy. Just level the black part of the conector and you can change the flat cable.

Can you do a simple copy and can you do a simple print job? For that you dont need the lcd info.

If yes, you need a new lcd display as a spare part (brother service partner).

If not, the main circuit board needs replacement (This spare part will cost more than a new mfc!)