I have a Motorola V3a and when I turn it on the keypad lights up but nothing shows on the screen a pin fell out of the side of where screen is but I replaced it. What could be wrong?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Clean the connectors with rubbing alcohol or electrical cleaner. If the cable if frayed, get a new one form the Apple Store. Apple OEM cables are much better than aftermarket ones in my experience.
Is your phone updates with the most currect software?
Thanks for writing Fixya. I am Marion and let me help you with this.
There are reasons why your phones keypad is not working, first, have you tried re aligning your keypad if it fits exactly on the button, also, you may try pressing the keys without the keypad tofind out if the problem is just on the keypad or on the phones hardware already. Also, the keypads functionality may affect if it had a water spill or had dropped previuosly.
Hi,what makes the calibration not working.is because the touch screen of the phone you are using is not functioning properly. And you will need to replace the touch pad of the phone for it to work properly again.
Hi, What makes the phone buttons work sometimes and doesn't work sometimes is because there is a flex inside that connected to the screen of the phone that makes the phone's keypad not to function properly is faulty and it needs to be replaced so that the keypads can work properly again..
Hi there!
That's sad to hear! Try to insert the card properly. If still it's not working properly just return it the store where you purchased it. Use the warranty to replace it or repair it.
SE K700i is noted for its sensitive joy stick. due to its normal wear
and tear, the time will come where the joystick will no longer function
properly. i suggest that you have it checked by a reliable technician.
they may check for dust and dirt that have accumulated through use or
they may suggest for replacement of the joystick.
Please check your back shutter it connected with a camera switch.
Remove the back of your phone & then set it again.
When you transfer data through Bluetooth, your phone should be directly in range of 10-15 metre
& your phone must be in "Shown to all" to work properly.
×